Lucent Technologies 4.1 User Manual

This feature lets a system phone user send touch-tone signals on an outside call
over a rotary line. For example, a user may need to dial touch-tone digits while
on a call to a bank-by-phone service.

■

You must use Dial Mode (#201)  to identify rotary lines to the system.

■

To activate this feature from within a number stored on an Auto Dial button
or as part of a Speed Dial number, press [

] when storing the

number—see  Special Dialing Functions.

■

This feature is needed only when dialing on a rotary line.

■

Use Touch-Tone Enable only after a call is connected. For example, use
this feature after dialing a bank-by-phone service that requires you to dial
touch-tone digits.

■

You can program a Touch-Tone Enable button on a system phone to turn on

Touch-Tone Enable with one touch.

To program a Touch-Tone Enable button:

1.

Press [

] [

] [

] [

] [

] [

].

2.

Enter the number of the extension to be programmed with this feature.

3.

Press a programmable button.

4.

Press [

] [

] [

].

5.

Program another button for this extension or exit programming mode.

From a system phone, press the programmed button or press [

] [

] [

]

when you need to dial touch-tone digits. Touch-Tone Enable stays in effect until
you hang up.

Touch-Tone Enable (F08)