Lucent Technologies 4.1 User Manual

If you have a problem with your system, you may be able to solve it by following
the appropriate troubleshooting procedures described in this chapter. If not,
you can call for help: in the continental U.S., call the hotline at 1 800
628-2888; outside the continental U.S., call your Lucent Technologies
Representative or local Authorized Dealer.

If you call, have the following information ready so that the representatives can
better help you:

■

The kind of system you have (for example, PARTNER 

II, 

Release 4.1) and

its operating mode (Key or Hybrid). (To determine the release number,
look at the processor module. For the system’s operating mode, at
extension 10 or 11, enter programming mode and try to access Line
Access Mode (#313).  If you can, your system is set for Hybrid mode. If
you can’t, your system is set for Key mode.)

The number of lines and extensions in your system

The type of phone (system or standard) and the model number, if
applicable. System phone model numbers are located either on the
upper right-hand corner of the phone or on the dialpad overlay.

If you followed a troubleshooting procedure and need more help, tell the

■

■

■

representative what you did.

When power to the system is cut off, the first line on each 206 module
automatically connects to the first extension on the module. This allows you to

make and answer calls during a power outage, provided you have a standard
phone connected to any of these extensions. (During a power failure, standard
phones can only make and receive calls—other system features are not

available.)

Troubleshooting