Lucent Technologies 4.1 User Manual
System Programming Quick Reference
Place the Programming Overlay on the dialpad of the system display phone at extension 10 or 11
TO START SYSTEM
TO END SYSTEM PROGRAMMING
TO CYCLE THROUGH SYSTEM
TO CYCLE THROUGH
PROGRAMMING
PRESS [
Feature
] [
0
] [
0
]
PROGRAMMING PROCEDURES
AVAILABLE SETTINGS
PRESS [
Feature
] [
0
] [
0
]
TO USE A SPECIFIC PROCEDURE
PRESS [
Next Procedure
] or [
Prev Procedure
] PRESS [
Next Data
] or [
Prev Data
]
PRESS [
System Program
]
DIAL [
#
] and three-digit procedure code
NOTES:
Procedures #399, #609,
TO RETURN TO FACTORY
PRESS [
System Program
]
and #728—shown below in dashed
SETTING
Example: [
#
] [
1
] [
0
] [
1
] for System Date
boxes—are skipped when cycling.
PRESS [
Remove
]
System
Lines
SYSTEM DATE
DIAL #101
DIAL the date in MMDDYY form
DIAL the date in MMDDYY form
DIAL MODE
DIAL #201
DIAL a line number (01–24)
DIAL
DIAL a line number (01–24)
DIAL
1 = Touch-Tone
✔
2 = Rotary
PRESS [
Next Item
] to program another
line
HOLD DISCONNECT TIME
DIAL #203
DIAL a line number (01–24)
DIAL
DIAL
1 = Long (450 msec)
✔
2 = Short (50 msec)
PRESS [
Next Item
] to program another
line
AUTOMATIC SYSTEM ANSWER
LINES
LINES
DIAL #204
DIAL a line number (01–24)
DIAL 1 = Assigned
DIAL a line number (01–24)
DIAL 1 = Assigned
2 = Not Assigned
✔
PRESS [
Next Item
] to program another
line
AUTOMATIC SYSTEM ANSWER
BUTTON
BUTTON
GROUP CALL DISTRIBUTION
SYSTEM DAY
DIAL #102
DIAL 1 = Sunday
DIAL 1 = Sunday
✔
5 = Thursday
2 = Monday
6 = Friday
3 = Tuesday
7 = Saturday
4 = Wednesday
DIAL #206
DIAL a group number
(1–6, 7 for VMS)
DIAL a line number (01–24)
DIAL 1 = Assigned
DIAL 1 = Assigned
2 = Not Assigned
✔
3 = VMS Line Cover (only for
hunt group 7)
PRESS [
Next Item
] to program another
line
DIAL #111
DIAL 1 = Assigned
2 = Not Assigned
✔
3 = Select Button then press
a programmable button
DIRECT EXTENSION DIAL DELAY
DIAL #112
DIAL a ring delay number (0–9)
✔
= 2 rings
SYSTEM TIME
DIAL #103
DIAL the time in HHMM 24-hour
DIAL the time in HHMM 24-hour
military format
POOL LINE ASSIGNMENT
DIAL #207
DIAL a line number (01–24)
DIAL 1 = No Pool
DIAL 1 = No Pool
2 = Main Pool 880
✔
3 = Pool 881
4 = Pool 882
5 = Pool 883
4 = Pool 882
5 = Pool 883
PRESS [
Next Item
] to program
another line
DIRECT EXTENSION DIAL BUTTON
DIAL #113
DIAL 1 = Assigned
2 = Not Assigned
✔
3 = Select Button then press
a programmable button
NUMBER OF LINES (p. 5-143)
*See IMPORTANT below
DIAL #104
DIAL two digits (01–24) for the
DIAL #104
DIAL two digits (01–24) for the
number of outside lines to be
assigned to every extension
assigned to every extension
✔
2 per 206 or 200 module
✔
4 per 400 module
OUTGOING CALL RESTRICTION
BUTTON
BUTTON
DIAL #114
DIAL 1 = Assigned
DIAL 1 = Assigned
2 = Not Assigned
✔
3 = Select Button then press
a programmable button
LINE COVERAGE EXTENSION
DIAL #208
DIAL a line number (01–24)
DIAL an extension number (10–57)
DIAL an extension number (10–57)
DIRECT EXTENSION DIAL LINES
DIAL #205
DIAL a line number (01–24)
DIAL 1 = Assigned
DIAL 1 = Assigned
2 = Not Assigned
✔
PRESS [
Next Item
] to program another
line
TRANSFER RETURN RINGS
DIAL #105
DIAL one digit (0–9) for the number
of rings before the call returns
✔
= 4 rings
0 rings = no return
PRESS [
Next Item
] to program another
line
WAKE UP SERVICE BUTTON
PRESS [
Remove
] to unassign
ownership
DIAL #115
DIAL
1 = Assigned
2 = Not Assigned
2 = Not Assigned
✔
3 = Select Button then press
a programmable button
RECALL TIMER DURATION
DIAL #107
DIAL two digits (01–80) to set the
length of a switchhook flash
✔
= 18 (450 msec)
Procedures #207, #313, #314 and #315—shown in square dotted boxes—
are not available when the system is configured for Key mode.
are not available when the system is configured for Key mode.
CALL COVERAGE RINGS
DIAL #116
DIAL one digit (1–9) for the number
of rings before the call is sent
to the covering extension
to the covering extension
✔
= 2 rings
IMPORTANT:
In Key mode, the Number of Lines procedure changes Line
Assignment (#301), Line Access Restriction (#302), Automatic Line Selection,
and Line Ringing to factory settings. To change line assignments without
affecting other settings, use Line Assignment (#301).
and Line Ringing to factory settings. To change line assignments without
affecting other settings, use Line Assignment (#301).
In Hybrid mode, the Number of Lines procedure changes Pool Line Assign-
ment (#207), Pool Extension Assignment (#314), and Pool Access Restriction
(#315) for existing pools back to factory settings. Additionally, it changes Line
Assignment (#301), Line Access Restriction (#302), Automatic Line Selection,
and Line Ringing for individual lines back to factory settings. To change pool
assignments without affecting other settings, use Pool Line Assignment (#207)
and Pool Extension Assignment (#314).
ment (#207), Pool Extension Assignment (#314), and Pool Access Restriction
(#315) for existing pools back to factory settings. Additionally, it changes Line
Assignment (#301), Line Access Restriction (#302), Automatic Line Selection,
and Line Ringing for individual lines back to factory settings. To change pool
assignments without affecting other settings, use Pool Line Assignment (#207)
and Pool Extension Assignment (#314).
ROTARY DIALING TIMEOUT
DIAL #108
DIAL 1 = 4 sec
3 = 12 sec
2 = 8 sec
✔
DIAL #117
DIAL one digit (1–9) for the number
DIAL one digit (1–9) for the number
of rings before the call is sent
to the voice messaging system
✔
= 3 rings
OUTSIDE CONFERENCE DENIAL
DIAL #109
DIAL
1 = Allowed
✔
2 = Disallowed
RING ON TRANSFER
DIAL #119
DIAL 1 = Active
DIAL 1 = Active
✔
2 = Not Active
For Centralized Telephone
Programming, see previous
pages
Programming, see previous
pages
AUTOMATIC SYSTEM ANSWER
DELAY
DELAY
DIAL #110
DIAL a ring delay number (0–9)
✔
= 2 rings
AUTOMATIC SYSTEM ANSWER MODE
DIAL #121
DIAL 1 = Hold
✔
2 = Disconnect
3 = Ring
3 = Ring