Lucent Technologies 4.1 User Manual

4.

Set Automatic Extension Privacy (#304) for extension X to Assigned.

5.

Make sure extension X is not assigned as a Call Waiting (#316) extension,
Pickup Group Extension (#501), Calling Group Extension (#502), Night
Service Group Extension (#504), or Hunt Group Extension (#505).

6.

Set the auto answer feature of the modem to Off.

If you need to place and receive calls with the modem, use the setup shown in
Figure 4-10. This setup makes line A the primary modem line, but keeps the line

available for users at other extensions when all other lines are busy.

Modem
Line A

Ext

Lines

CONTROL

X

UNIT

MODEM

Calls on the modem line (line A) ring only at extension X. Also, line A is the last
line selected by all other extensions, so the modem line is unavailable for the
modem only when all other lines in the system are being used.

1 .

If extension X is a key extension, use Line Assignment (#301) to assign one
or more lines to extension X (including line A).

If extension X is a pooled extension, use Pool Line Assignment (#207) to

remove line A from all pools. Then use Pool Extension Assignment
(#314) to assign pools to extension X. Also use Line Assignment (#301)

to assign line A and any other individual lines to extension X.

2 .

For extension X, set Automatic Line Selection to select pools and outside
lines first (line A selected last).

For all other extensions, set Automatic Line Selection so that line A is the last
line in the select sequence. That way, the modem line is used for outgoing

voice calls only when all other lines are busy.

3 .

Set Line Ringing for line A at extension X to Immediate Ring. Set all other
lines or pools assigned to extension X to No Ring. (For all other

extensions, set line A to No Ring.)

Using Auxiliary Equipment