Harmar Mobility AL003 User Manual
Hitch Adapter Installation
REMOVE,
FLIP,
RE-ATTACH
FLIP,
RE-ATTACH
REMOVE,
FLIP, MOVE UP,
RE-ATTACH
FLIP, MOVE UP,
RE-ATTACH
REMOVE,
MOVE UP,
RE-ATTACH
MOVE UP,
RE-ATTACH
Bumper Mount
( Be sure to comply with
vehicle's bumper rating )
CLASS 1
( Flat Bar Style )
CLASS 2
( 1.25 x 1.25 Solid Bar )
Omit stabilizer
CLASS 3
( 2 x 2 TUBE )
Do not attempt to
mount up from under
Refer to diagram below
for proper orientation
( right side up or upside down )
Determines carrier's height
from the ground
DETERMINE BEST MOUNTING HEIGHT
45 max
Harmar recommends maintaining 8-12" of ground
clearance from the bottom of the unfolded platform,
while not exceeding 45 degrees of tilt ( 12" off the ground )
To achieve this, a number of mounting options are available.
clearance from the bottom of the unfolded platform,
while not exceeding 45 degrees of tilt ( 12" off the ground )
To achieve this, a number of mounting options are available.
8-12"
Measure from Hitch Bar to ground
AS SHIPPED
8-12"
10-14"
12-16"
14-18"
IF FLIPPING HITCH ADAPTER FOR BETTER HEIGHT,
BOTH PARTS MUST BE FLIPPED TOGETHER.
BOTH PARTS MUST BE FLIPPED TOGETHER.
ORIENTATION OF THESE PARTS IS IMPORTANT
FOR THE TILT AWAY FEATURE LIMITS.
FOR THE TILT AWAY FEATURE LIMITS.
OR
NOTE:
ORIENTATION OF CLASS 2 and CLASS 3 HITCH ADAPTERS IS IDENTICAL