Harmar Mobility AL500 User Manual
Vehicle Hitch
OPERATION
LOADING THE WHEELCHAIR
AL030
ON
DOWN
UP
"PLATFORM KEEPER"
NOTE: The Platform will not be
allowed to unfold until the platform
has been lowered at least an inch.
allowed to unfold until the platform
has been lowered at least an inch.
WELDED
TO
PLAT
FORM
Insert Key and switch to "ON" position
Press down on Toggle switch momentarily.
Press down on Toggle switch momentarily.
1
Once platform has been lowered at least an
inch, unfold the platform. Continue lowering
to the ground. Raise hold down arm.
inch, unfold the platform. Continue lowering
to the ground. Raise hold down arm.
2
Roll folded chair onto platform as shown.
3
Raise the lift until hold down arm has
contacted wheelchair's arm rests.
contacted wheelchair's arm rests.
4
To remove the chair and prepare the lift
for unloaded travel, follow above steps in
reverse order and reverse the direction
of the arrows.
for unloaded travel, follow above steps in
reverse order and reverse the direction
of the arrows.
Lift should be raised
with the platform folded
and until the lift's motor
ratchets. Verify that the
platform keeper has
engaged the platform's
pin.
with the platform folded
and until the lift's motor
ratchets. Verify that the
platform keeper has
engaged the platform's
pin.
PLA
TFORM
's PI
N
PLA
TFO
RM KEEPER
22