Panasonic KX-FG6550 User Manual
10. Help
106
For assistance, please visit http://www.panasonic.com/consumersupport
10.3.8 If a power failure occurs
L
The unit will not function.
L
The unit is not designed for making emergency telephone calls when the power fails. Alternative
arrangements should be made for access to emergency services.
arrangements should be made for access to emergency services.
L
Fax transmission and reception will be interrupted.
L
If delayed transmission (feature #25 on page 80) is programmed and a power failure prevents the
document from being sent at the set time, the document will be sent after power is restored.
document from being sent at the set time, the document will be sent after power is restored.
L
If any fax documents are stored in the memory, they will be lost. When power is restored, a power
down report will be printed stating which documents in memory have been erased.
down report will be printed stating which documents in memory have been erased.
I cannot listen to
messages from a remote
location.
messages from a remote
location.
L
Press the remote operation ID (code) correctly and firmly (feature
#11 on page 79, or feature 063 on page 89).
#11 on page 79, or feature 063 on page 89).
L
The unit is not in TAM/FAX mode or TAM ONLY mode. Change to
TAM/FAX mode (page 59) or TAM ONLY mode (page 61).
TAM/FAX mode (page 59) or TAM ONLY mode (page 61).
I cannot operate the
answering machine with
the handset.
answering machine with
the handset.
L
Someone is operating the answering machine.
L
You are too far from the base unit. Move closer to the base unit.
During message
playback, the unit rings.
playback, the unit rings.
L
A call is being received. To answer the call, if you are using the
base unit, press {SP-PHONE}, {LINE1} or {LINE2} on the base
unit. If you are using the handset, press {TALK}, {SP-PHONE},
{
base unit, press {SP-PHONE}, {LINE1} or {LINE2} on the base
unit. If you are using the handset, press {TALK}, {SP-PHONE},
{
LINE1} (soft key) or {LINE2} (soft key) on the handset. For
playback, start again from the beginning after hanging up.
The Ringer/Message alert
indicator flashes slowly
when the handset is not
ringing and in use.
indicator flashes slowly
when the handset is not
ringing and in use.
L
This is normal. The message alert is turned ON and new
messages have been recorded. Turn the message alert OFF
(feature 0# on page 90) or listen to the new messages (page 68,
70).
messages have been recorded. Turn the message alert OFF
(feature 0# on page 90) or listen to the new messages (page 68,
70).
Caller ID information does
not display during
message playback.
not display during
message playback.
L
The caller information will not be displayed
–
–
if a message is recorded by using {MEMO} (page 72), or
–
if a call is transferred to the answering machine and the caller
leaves a message (page 69).
leaves a message (page 69).
{
MESSAGE} indicator still
flashes even if you have
listened to all new
messages.
listened to all new
messages.
L
The other line has new messages. Select that line by pressing
{
{
LINE SELECT}, then play back the new messages (page 68).
L
If you selected lines to play back messages, memo messages will
not be played. Play back messages without selecting lines first
(page 68).
not be played. Play back messages without selecting lines first
(page 68).
Memo messages are not
played after pressing
{
played after pressing
{
MESSAGE}.
L
You may have pressed {LINE SELECT} before pressing
{
{
MESSAGE}. Press {MESSAGE} again without pressing {LINE
SELECT} (page 68).
Problem
Cause & Solution
FG6550-PFQX2225ZA-en.book Page 106 Monday, August 8, 2005 8:16 PM