Panasonic KX-FG6550 User Manual
3. Telephone
37
Note:
L {
LINE1} and {LINE2} show the status of
each line (page 11).
To mute your conversation
During a call, you can mute your unit so the other
party cannot listen to you. When the call is
muted, you will be able to hear the other party.
Press {MUTE}.
party cannot listen to you. When the call is
muted, you will be able to hear the other party.
Press {MUTE}.
L
“
SP-PHONE MUTE” will be displayed.
L
To release the mute, press {MUTE} or {SP-
PHONE}.
PHONE}.
To put a call on hold
Press {HOLD}.
L
“
HOLD” and the line number(s) on hold will
be displayed. Also, {LINE1} or {LINE2} will
flash for the line(s) on hold.
flash for the line(s) on hold.
L
To release the hold, press {LINE1} or
{
{
LINE2} that is flashing to select the line(s)
on hold.
L
If you do not press a button for more than 6
minutes, beeps will start to sound. After 4
additional minutes on hold, the line(s) will be
disconnected.
minutes, beeps will start to sound. After 4
additional minutes on hold, the line(s) will be
disconnected.
To redial the last number dialed from the
base unit
base unit
1. Press {SP-PHONE}, {LINE1} or {LINE2}.
2. Press {REDIAL/PAUSE}.
3.2 Answering phone calls
When a call is received, the unit rings and:
–
–
“
Incoming call” and the called line are
displayed on the handset and the
Ringer/Message Alert indicator (
Ringer/Message Alert indicator (
1) flashes
rapidly.
–
“
INCOMING CALL” and the called line are
displayed on the base unit and {LINE1} or
{
{
LINE2} which is being called flashes rapidly.
2 calls can be handled simultaneously on
separate telephone lines by the handset and the
base unit, or by 2 handsets (when the system
has 2 or more handsets, page 6).
separate telephone lines by the handset and the
base unit, or by 2 handsets (when the system
has 2 or more handsets, page 6).
3.2.1 With the handset
1
Lift the handset and press {TALK}.
L
The called line is automatically selected.
To change the line selection, see feature
055 on page 89.
To change the line selection, see feature
055 on page 89.
L
You can also answer a call by selecting
the called line by pressing {LINE1} (soft
key
the called line by pressing {LINE1} (soft
key
2) or {LINE2} (soft key 2).
L
You can also answer a call by pressing
any button except {v}, {e}, {OFF} or a
soft key (Any key talk feature).
any button except {v}, {e}, {OFF} or a
soft key (Any key talk feature).
2
When finished talking, press {OFF} or place
the handset on the charger.
the handset on the charger.
Answering phone calls hands-free
1. Lift the handset and press {SP-PHONE},
and talk into the microphone (
3).
2. When finished talking, press {OFF} or place
the handset on the charger.
Auto talk feature (Handset)
This feature allows you to answer a call by simply
lifting the handset off the charger. The default
setting is OFF. To activate this feature, see
feature 03 on page 88.
lifting the handset off the charger. The default
setting is OFF. To activate this feature, see
feature 03 on page 88.
Speakerphone operation
L
Adjust the base unit speaker volume using
{A}
{A}
or {B}.
L
Talk alternately with the caller in a quiet
room.
room.
L
If the other party has difficulty hearing you,
press {B} to decrease the speaker
volume.
press {B} to decrease the speaker
volume.
L
If the other party’s voice from the speaker
cuts in/out during a conversation, press
{B}
cuts in/out during a conversation, press
{B}
to decrease the speaker volume.
L
To switch to the handset, press {LINE1}
(soft key) or {LINE2} (soft key) on the
handset, then press {SP-PHONE}, or
{
(soft key) or {LINE2} (soft key) on the
handset, then press {SP-PHONE}, or
{
LINE1} or {LINE2} that is lit on the base
unit.
1
{
OFF}
{
TALK}
{
SP-PHONE}
{e}{v}
2
3
FG6550-PFQX2225ZA-en.book Page 37 Monday, August 8, 2005 8:16 PM