Grundig GLCD2206HDV User Manual

Page of 44
 
- 37 -
VIII. Notes 
(1) Please read these operating instructions carefully before you 
operate this unit. 
(2)  When you want to cut off the electricity supply to the unit, please 
press the STANDBY button on the unit, then take out the plug from 
the wall outlet. 
(3)  Don’t press any buttons if you are not using the unit. Set the 
STANDBY
 button to “OFF”, and take out the batteries from the 
remote control if the unit is not being used for a long period of time. 
(4)  Be cautious of the safe mark. 
(5)  Repairs are to be referred to qualified service personnel. DO NOT 
attempt to take apart by yourself. 
(6)  Due to a sudden change in temperature or humidity, or when warm 
air comes into contact with any cold parts in the unit, condensation 
may form. When condensation forms inside, the unit may not 
function well. Once condensation disappears, the unit will return to 
normal functions. Placing the unit in a warm room will help to dry up 
condensation. This should take 1 to 2 hours, depending on 
environmental conditions. As condensation may also appear on the 
disc, it should be wiped from the center towards the outer side 
using a dry cloth. 
(7)  It is dangerous to use warped or broken discs since lasers rotate at 
high speed. Never use discs repaired with plastic tape or glue, as it 
will lead to damage. After playing, if you hear a strange noise or the 
unit flatters, e.g. the disc does not turn smoothly, please stop 
playing immediately. 
(8)  Please remove the disc after use and put into a case, store them in 
a vertical position. Tilting or piling may lead to warping. 
         Please keep the discs away from direct sunlight, high temperature 
 and humidity. 
         Do not stick labels onto discs. 
         Do not scratch the surface of discs.