Pioneer PDP-6070 User Guide

En

(from standby mode) 

Press 

a 

POWER on the Plasma Display if the POWER ON 

and STANDBY indicators are off.

• The STANDBY indicator on the Plasma Display lights up 

red.

Confirm that the STANDBY indicator lights up red, and 
then press 

TV a on the remote control unit or STANDBY/

ON on the Plasma Display to turn the system on.
• The POWER ON indicator on the Plasma Display lights 

up blue.

(to standby mode) 

Press 

TV a on the remote control unit or STANDBY/ON 

on the Plasma Display.

• The system enters the standby mode and the image on 

the screen disappears.

• The  STANDBY  indicator lights up red.

• This will allow the system to automatically receive digital 

TV program information while in the standby mode.

• If you are not going to use this system for a long period of 

time, remove the power cord from the power outlet.

The table below shows the operational status of the Plasma 
Display System. You can check the current status of the system 
with the indicators on the Plasma Display.

For other than the above, see “Troubleshooting”on page 91.

• While the POWER ON and STANDBY indicators are off, the 

system cannot be placed into the power-on mode even when 

TV a or STANDBY/ON button is pressed. Make sure to 
press 

POWER and see if the standby indicator lights up red. 

• The Plasma Display System will still consume some power 

as long as the power cord is inserted into the power outlet.

Viewed from below of the display (left).

The power cord of the Plasma Display has 
been disconnected or the 

POWER button 

on the Plasma Display is off.

Power to the system is on.

The system is in the standby mode.

REC TIMER

STANDBY

ON

POWER

REC TIMER indicator

POWER ON indicator

POWER button

STANDBY indicator

ON STANDBY

POWER

STANDBY indicator

POWER ON indicator

POWER button

REC TIMER

ON

STANDBY

STANDBY 
indicator

POWER ON 
indicator

POWER button

STANDBY/ON 
button

PDP6070HD.book  Page 32  Friday, May 19, 2006  5:01 PM