Pioneer PDP-6070 User Guide

En

When the thumbnail screen is displayed, press  /  and  /  
to highlight a desired image, and then press 

ENTER. The 

thumbnail screen closes, and only the selected image is 
displayed.

With the above screen displayed, you can use the following 
keys to perform various operations:

Displays the previous image in the normal or full screen.

Displays the next image in the normal or full screen.

Rotates the displayed image clockwise. Each press rotates the 
image in the sequence; 90°, 180°, and then 270°.

Each press switches between the normal screen and the full 
screen.

Quits the Home Gallery function.

• Be careful not to display the same image for an extended 

period of time. The image may be burnt into the screen, 
resulting in a residual image.

• Images smaller than 1024 × 768 pixels are displayed with 

blank surrounding.

When the thumbnail screen is displayed, press 

RED to start the 

screen to set up the Slide Show that sequentially changes images.

Select “Display Mode”. ( / )

Select “Normal” or “Full”. ( / )

• With “Full” selected, images are displayed using the full 

screen.

Select “Playback Order”. ( / )

Select “Name Order” or “Random”. ( / )

Select “Number of Times of Playback”. ( / )

Select “Single Time” or “Loop”. ( / )

• With “Loop” selected, Slide Show is repeated until 

RETURN is pressed. 

Select “Playback Mode”. ( / )

Select “Auto” or “Manual”. ( / )

• With “Auto” selected, images are automatically 

changed at the specified intervals.

• With “Manual” selected, the previous image is displayed 

by pressing 

BLUE or the next image by pressing RED.

If you have selected “Auto” in step 8, press  /  to select 
“Interval(sec)”, and then press  /  to select the desired 
display duration for individual images.

• You can select from among 3 seconds, 5 seconds, 10 

seconds, 20 seconds, 30 seconds, 60 seconds, and 90 
seconds.

To start the Slide Show screen, press 

RETURN to display 

the thumbnail screen and then press 

BLUE.

• To quit the Home Gallery function, press 

HOME MENU. 

• If you intend to display the Slide Show screen for an extend 

period of time, select “FULL” for the screen size in order to 
avoid image retention on the screen.

After setting up the Slide Show, you can start it to sequentially 
change the images.

To start the Slide Show screen, press 

BLUE when a 

thumbnail screen is displayed.

• With “Auto” selected for “Playback Mode”, images are 

automatically changed at the specified intervals.

• With “Manual” selected for “Playback Mode”, press 

BLUE to display the previous image or RED to display the 
next image.

• While images are automatically changed, you can stop 

and hold automatic image change for approximately 300 
seconds by pressing 

BLUE. To resume, press and hold 

BLUE again.

When quitting the Slide Show screen, press 

RETURN to 

restore the thumbnail screen or 

HOME MENU to quit the 

Home Gallery function. 

Select from normal screen or full screen by pressing 
ENTER.
• Each press switches between the normal screen and the 

full screen.

PDP6070HD.book  Page 80  Friday, May 19, 2006  5:01 PM