iOptron 6820 User Manual
Using the LCD Monitor
Step 1. Turning on the LCD Monitor.
Press the on bottom on the LCD Monitor.
Step 2. Zooming.
Use “up” and “down” arrows to zooming in or out.
Step 3. Taking a picture
Set the LCD device to picture mode by pressing the
“mode” key, until the top right corner of the LCD
screen shows “A” (see yellow circle). Press “Snap”
Key to take a picture.
Step 4. Taking a video.
Set the LCD device to video mode by pressing the
“mode” key, until the top right corner of the LCD
screen shows an image of a camera (see yellow
circle). Press “OK” Key to take a picture.
Step 5. Connecting the USB Cord
Remove the rubber cover from the bottom of the LCD
monitor. Next, plug the USB cord into slot on LCD
monitor (see red arrow). Then connect the other end
of the USB cord to your computer. You can then
access the image or video files on the USB drive.
Press the on bottom on the LCD Monitor.
Step 2. Zooming.
Use “up” and “down” arrows to zooming in or out.
Step 3. Taking a picture
Set the LCD device to picture mode by pressing the
“mode” key, until the top right corner of the LCD
screen shows “A” (see yellow circle). Press “Snap”
Key to take a picture.
Step 4. Taking a video.
Set the LCD device to video mode by pressing the
“mode” key, until the top right corner of the LCD
screen shows an image of a camera (see yellow
circle). Press “OK” Key to take a picture.
Step 5. Connecting the USB Cord
Remove the rubber cover from the bottom of the LCD
monitor. Next, plug the USB cord into slot on LCD
monitor (see red arrow). Then connect the other end
of the USB cord to your computer. You can then
access the image or video files on the USB drive.
Rubber
Cover
USB
Cord
Up Key
Down Key
Mode
Key
Snap
Key
Mode
”OK”
Key