Cobalt Networks 9033-SD User Manual
Page 18 of 26
9033-SD Owner’s Manual
•••• (V 1.1)
Menu
Item
Format
Description
Enable
Group Enable
Disable
Enables or disables the
entire group of 4 channels.
entire group of 4 channels.
Embedded 1-16
AES 1-16
Analog 1-8
Source
(per channel)
(per channel)
Silence
Chooses the source for the
embedded audio. The
source for each channel
can be chosen separately.
embedded audio. The
source for each channel
can be chosen separately.
Gain
(per channel)
(per channel)
Range (-400) – 400
Gain applied to embedded
audio output, one slider
for each channel.
audio output, one slider
for each channel.
Normal
Embedded
Audio Group
(Groups 1-4)
Audio Group
(Groups 1-4)
Phase
(per channel)
(per channel)
Invert
Inverts the phase of the
embedded audio.
embedded audio.
Menu
Item
Format
Description
Tone
Generator
Generator
Tone Generator 1-4
Frequency
Frequency
Range 50Hz –16KHz
Selects the frequency of
the tone generated.
the tone generated.
Menu
Item
Format
Description
Card Name
Up to 31 ASCII
This gives the board a
unique name that will
show up in the device list.
unique name that will
show up in the device list.
Selected Preset
Range (1 - 5)
Loads parameters
previously saved.
previously saved.
Preset Name
Up to 31 ASCII
Gives a unique name to
the preset being saved.
the preset being saved.
Preset Save
Confirm
Saves the parameters as
preset selected and preset
name entered.
preset selected and preset
name entered.
Preset Load
Confirm
Loads parameters of
selected preset.
selected preset.
Presets
Reset Current
Preset
Preset
Confirm
Will load factory presets
and overwrite the save.
and overwrite the save.