AGFA HE/001132 User Manual
HE/001132
Page 39 of 92
Document No.001132, Revision 2.0
NodeID Livelink : 14140190
Agfa HealthCare
14 June, 2007
Attribute Name
Tag
Value
Configuration Information
(2010,0150)
Configurable
Illumination
(2010,015E)
Configurable
Reflective Ambient Light
(2010,0160)
Configurable
Referenced Film Session
Sequence
Sequence
(2010,0500)
A sequence which provides references to a Film Session SOP
Class/Instance pairs. Only a single Item is permitted in this
Sequence.
Class/Instance pairs. Only a single Item is permitted in this
Sequence.
>Referenced SOP Class UID
(0008,1150)
Uniquely identifies the referenced SOP Class
>Referenced SOP Instance UID
(0008,1155)
Uniquely identifies the referenced SOP Instance.
Referenced Presentation LUT
Sequence
Sequence
(2050, 0500)
A sequence which provides references to a Presentation LUT
related SOP Class/Instance pairs. Only a single Item shall be
included in this sequence.
related SOP Class/Instance pairs. Only a single Item shall be
included in this sequence.
>Referenced SOP Class UID
(0008, 1150)
Uniquely identifies the referenced SOP Class
>Referenced SOP Instance UID
(0008, 1155)
Uniquely identifies the referenced SOP Instance.
"Workstation" (SCU) will process the N-CREATE confirmation and response Status codes. The status codes
below are recognized:
below are recognized:
Table 2.2-28: N-CREATE Status Codes
Code
Status
Meaning
0000
Success
Normally returned by the SCP AE. Film Box successfully created.
B605
Warning
Requested Min Density or Max Density outside of printer’s operating range. The printer will use its
respective minimum or maximum density value instead.
respective minimum or maximum density value instead.
*
Other
Status
codes
Status
codes
Other Dicom error codes result in the failure of the job. Other warnings are not communicated to
the user.
the user.
2.2.2.3.1.3.3
Basic Grayscale Image Box SOP Class (1.2.840.10008.5.1.1.4)
The Basic Image Box IOD is an abstraction of the presentation of an image and image related data in the
image area of a film. The Basic Image Box IOD describes the presentation parameters and image pixel data
which apply to a single image of a sheet of film.
image area of a film. The Basic Image Box IOD describes the presentation parameters and image pixel data
which apply to a single image of a sheet of film.
The Basic Grayscale Image Box SOP Instance is created by the SCP at the time as the Basic Film Box SOP
Instance (§
Instance (§
) is created, based on the value of the Basic Film Box Attribute Image Display
Format (2010, 0010).
The Basic Grayscale Image Box SOP Instance refers to zero or one Image Overlay Box SOP Instance and
zero or one Presentation LUT SOP Instance.
The Basic Grayscale Image Box SOP Instance refers to zero or one Image Overlay Box SOP Instance and
zero or one Presentation LUT SOP Instance.
"Workstation" (SCU) can send the following DIMSE services:
·
N-SET
N-SET is issued by "Workstation" (SCU) to update an instance of the Grayscale Image Box SOP Class.
When all needed Basic Grayscale Image Boxes have been set, "Workstation" (SCU) issues a print
command. There can be empty image positions. By using N-SET, "Workstation" (SCU) can instruct the SCP
to erase the image in the image position by setting a zero length and no value in the attribute Basic
Grayscale Image Sequence. The N-Set attributes for the Basic Grayscale Image Box are listed below:
command. There can be empty image positions. By using N-SET, "Workstation" (SCU) can instruct the SCP
to erase the image in the image position by setting a zero length and no value in the attribute Basic
Grayscale Image Sequence. The N-Set attributes for the Basic Grayscale Image Box are listed below: