Philips 00 User Manual
2.3 Using the remote to control your digital receiver –The remote
control is set to STB mode
English
U S I N G YO U R R E M O T E C O N T R O L 11
FAV
Open / close the current channel
list.
Open / close the current channel
list.
GUIDE
Open / close the Program Guide
Open / close the Program Guide
RADIO
Toggle between TV and Radio
modes. Wake up from standby.
Toggle between TV and Radio
modes. Wake up from standby.
Standby B
B
Switches your receiver into the
standby mode.
standby mode.
EXIT
Returns to normal viewing mode.
If [EXIT] is pressed and held for
at least 2 seconds, the currently
launched application is killed and
normal viewing is resumed. After
that the "autostart" status is
switched off temporarily as long as
the box is tuned to this channel.
Returns to normal viewing mode.
If [EXIT] is pressed and held for
at least 2 seconds, the currently
launched application is killed and
normal viewing is resumed. After
that the "autostart" status is
switched off temporarily as long as
the box is tuned to this channel.
P+ / P-
- In viewing mode: Tunes to the
- In viewing mode: Tunes to the
higher/lower channel within the
same channel list.
same channel list.
- scrolls one page up or down in
channel list
- In standby Wakes up the Digital
Receiver.
4
4
Open the Options menu to
change momentarily soundtrack /
subtitles / teletext / display format
setting.
VW
- Switches the Channel Banner
Open the Options menu to
change momentarily soundtrack /
subtitles / teletext / display format
setting.
VW
- Switches the Channel Banner
in the browsing mode.
- Scrolls selection up/down in a
menu or channel list.
CB
- In Channel Banner, switch
- In Channel Banner, switch
between the current and next
program.
program.
OK key
Confirms your choices.
Confirms your choices.
REC
Open the Setting a Timer
screen.
Open the Setting a Timer
screen.
MODE
Selects the remote control mode
(STB, TV, VCR, DVD, AMP-
TUNER).
Selects the remote control mode
(STB, TV, VCR, DVD, AMP-
TUNER).
A
A +/-
Change the volume level on your
TV or Digital Receiver (refer to
2.2.2.2 for setting).
Change the volume level on your
TV or Digital Receiver (refer to
2.2.2.2 for setting).
TV/STB a
a
Toggles between watching
terrestrial digital programs
via your receiver and
standard analogue
programs via your TV set.
terrestrial digital programs
via your receiver and
standard analogue
programs via your TV set.
MENU
Opens / Closes the Menu.
Opens / Closes the Menu.
m
m
Switches between viewing mode,
Channel Banner, and Channel
Banner with Extended Info.
Switches between viewing mode,
Channel Banner, and Channel
Banner with Extended Info.
MUTE c
Mutes the sound on your TV or
Digital Receiver (refer to 2.2.2.2
for setting).
Mutes the sound on your TV or
Digital Receiver (refer to 2.2.2.2
for setting).
BACK
- In viewing mode: Returns to the
- In viewing mode: Returns to the
previously tuned channel
- In menu mode returns to the
previous screen.
WHITE/TEXT
TXT button used in MHP
applications.
TXT button used in MHP
applications.
0-9
- In viewing mode: Selects
- In viewing mode: Selects
channels
- In menu; Selects directly menu
item or Sets new parameter
value
value
- In standby Wakes up the Digital
Receiver.
RED, GREEN, YELLOW, BLUE
Contextual buttons used in MHP
applications.
Contextual buttons used in MHP
applications.
6610_A5_GB.qxd 01/09/2004 12:58 Page 11