GenTran ATS1001D User Manuals

Table of Contents

• SECTION 1 - INTRODUCTION

  4
• 1.1 General Description

  4
• 1.2 Standard Configurations

  5
• 1.3 Typical Installations

  5
• 1.4 How the OVATION™ Series Automatic Transfer Switch Works

  6
• 1.5 Key Components

  7
• 1.6 Standards Compliance

  10
• SECTION 2 – COMPATIBLE EQUIPMENT

  11
• 2.1 Compatible Generators

  11
• 2.2 Compatible Circuit Breakers

  11
• SECTION 3 – PREPARING FOR INSTALLATION

  12
• 3.1 Tools Required

  12
• 3.2 Unpacking/Inspection

  12
• 3.3 Mounting Location

  12
• 3.4 Planning, Selecting and Prioritizing Your Circuits

  12
• SECTION 4 – INSTALLATION AND WIRING

  15
• 4.1 Standard Mounting Procedures

  18
• 4.2 Mounting Procedure for Two Load Centers

  20
• 4.3 Connecting the Low Voltage Cable to the OVATION™ Series ATS

  20
• 4.4 Connecting the Low Voltage Cable to the Generator

  21
• 4.5 Installing and Wiring PowerPause™ Load Management Modules

  21
• SECTION 5 – PROGRAMMING THE SYSTEM

  23
• 5.1 Setting Generator Size

  23
• 5.2 Setting Generator Exercise Schedule and Transfer Option

  23
• 5.3 User Interface Display LEDs

  23
• 5.4 User Interface Display/Control Module Functions

  24
• SECTION 6 –STARTUP AND TESTING

  25
• 6.1 Preliminary Checks

  25
• 6.2 Energizing the Transfer Switch

  25
• 6.3 Testing the Transfer Switch

  25
• 6.4 Programming the PowerPause™ Load Management Modules (if installed)

  25
• 6.5 Re-Installing Covers and Labeling Circuits

  26
• 6.6 Generator Battery Monitoring

  26
• SECTION 7 – TROUBLESHOOTING

  27
• 7.1 Basic Troubleshooting

  27
• 7.2 Troubleshooting Guide

  27
• SECTION 8 – MAINTENANCE AND SERVICE

  29
• 8.1 Maintenance

  29
• 8.2 Factory Default Settings

  29
• 8.3 Product Registration

  29