Haier HDS-2380EG User Manuals

Table of Contents

• Installation

  2
• Important safety instruction

  3
• PRODUCT INTRODUCTION

  5
  • 1. Appearance and structure diagram

    5
  • 2. Control panel

    6
  • 3、LED instruction and display

    6
  • Function and Operation method

    7
    • 1. Auto reminder

      7
    • 2. Clock setting

      7
    • 3. Microwave cooking

      8
    • 4. Grill.Combi

      9
    • 5. Defrost

      10
    • 6. Auto cooking

      11
    • 6. Automatic starting (delayed function)

      12
    • 7. Multi-sequence cooking

      14
    • 8. Child lock function

      14
    • 9. UTENSILS GUIDELINE

      15
    • 10. Cooking Tips

      16
  • CLEANING and MAINTENANCE

    17
    • Microwave oven care

      17
    • TIPS for cleaning

      18
    • Servicing

      18
    • SERVICING SAFEGUARDS

      19
    • MICROWAVE RADIATION！

      19
    • It is hazardous for anyone, other than a qualified service technician, to carry out any service for repairing operation which involves removal of any cover which gives protection against exposure to microwave energy.

      19
    • The temperature of accessible surfaces may be high when the appliance is operating

      19
    • The high voltage capacitor remains charge after disconnection; short the negative terminal of H. V capacitor to the oven chassis (use a screwdriver) to discharge before touching.

      19
    • During servicing below listed parts are liable to be removed and give access to potentials above250V to earth.

      20
    • 1. Magnetron

      20
    • 2. High voltage transformer

      20
    • 3. High voltage capacitor

      20
    • 4. High voltage diode

      20
    • 5. High voltage fuse

      20
    • The following conditions may cause undue microwave exposure during servicing.

      20
    • Improper fitting of magnetron;

      20
    • Improper matching of door interlock, door hinge and door;

      20
    • Improper fitting of switch support;

      20
    • Door, door seal or enclosure has been damaged.

      20
    • 1. if LED displays Err0 during working ，it indicates that sensor has been short circuit and you need replace it at the nearest repaired department.

      20
    • 2. if LED displays Err1 during working ，it indicates that sensor has been open circuit and you need replace it at the nearest repaired department.

      20
    • If the door or door seals are damaged, the oven must not be operated until it has been repaired by a competent person;

      20
    • It is hazardous for anyone, other than a qualified service technician, to carry out any service for repairing operation which involves removal of any cover which gives protection against exposure to microwave energy.

      20
    • Liquids or other foods must not be heated in sealed containers since they are liable to explode;

      20
    • Only allow children to use the oven without supervision when adequate instructions have been given so that the child is able to use the oven in a safe way and understands the hazards of improper use

      20