User ManualTable of ContentsBEFORE YOU BEGIN...................................................................................... 12IMPORTANT SAFETY NOTICES..................................................................... 22SMITH MACHINE HARDWARE PACK……….....….......................................... 42SMITH MACHINE ASSEMBLY INSTRUCTIONS...............................................62SMITH MACHINE EXPLODED DIAGRAM........................................................152SMITH MACHINE PARTS LIST…………………………………………………… 162BENCH HARDWARE PACK……….....…..................................................…….172BENCH ASSEMBLY INSTRUCTIONS......................................................…….192BENCH EXPLODED DIAGRAM...............................................................……. 242BENCH PARTS LIST……………………………………………………………….. 252WARRANTY.................................................................................................… 262ORDERING PARTS......................................................................................... 262CAGE MACHINE HARDWARE PACK6SMITH MACHINE ASSEMBLY INSTRUCTION7Note: Do not tighten the Nuts and Bolts until instructed to do so.7Connect the two Base Frames (#3) by the Cross Brace (#7). Secure each end of the Cross Brace to each Base Frame with four M10 x 2 3/8” Carriage Bolts (#50), one 4 ¾” x 3 ¼” Bracket (#22), four Ø ¾” Washers (#57), and four M10 Aircraft Nuts (#58).7Attach the Left Rear Support (#5) onto the left Base Frame. Secure it with two M10 x 3 ½” Allen Bolts (#55), four Ø ¾” Washers (#57), and two M10 Aircraft Nuts (#58). Repeat the same step to install the Right Rear Support (#6) onto the other Base Frame.7DIAGRAM 17STEP 6 (See Diagram 6)15SMITH MACHINE EXPLODED DIAGRAM16SMITH MACHINE PART LIST17KEY NO. DESCRIPTION Q’ty17BENCH PARTS LIST26KEY NO. DESCRIPTION Q’ty26Size: 2.73 MBPages: 27Language: EnglishOpen manual