Impex PWR 6 User Manuals

Table of Contents

• BEFORE YOU BEGIN...................................................................................... 1

  2
• IMPORTANT SAFETY NOTICES..................................................................... 2

  2
• HARDWARE PACK……….....…....................................................................... 3

  2
• ASSEMBLY INSTRUCTIONS........................................................................... 5

  2
• EXPLODED DIAGRAM.........................................................................………. 17

  2
• PARTS LIST………………………………………………………………………….. 19

  2
• WARRANTY.................................................................................................… 20

  2
• ORDERING PARTS......................................................................................... 20

  2
• HARDWARE PACK

  5
• ASSEMBLY INSTRUCTION

  6
  • Attach an Upright Beam (#49) to a Floor Stabilizer (#47). Secure it with two M10 x 2 3/4” Carriage Bolts (#81), ( ¾” Washers (#42), and M10 Aircraft Nuts (#44). Do not tighten the nuts and bolts yet.

    11
  • Attach the upper end of Left Support (#50) to the Upright Beam. Secure it with one M10 x 5/8” Allen Bolt (#88) and ( ¾” Washer (#42).

    11
  • Attach the lower end of Left Support (#50) to the Floor Stabilizer (#47). Attach one end of the Rear Stabilizer (#53) to the Floor Stabilizer. Align the holes and secure them with two M10 x 3 ¾” Carriage Bolts (#83), ( ¾” Washers (#42) and M10 Aircraft N

    11
  • Repeat Steps A, B and C above to install the other side.

    11
  • Securely tighten all Nuts and Bolts.

    11
  • DIAGRAM 6

    11
    • DIAGRAM 10

      17
• PARTS LIST

  20
• KEY NO. DESCRIPTION Q’ty

  20