User ManualTable of ContentsContents3Introduction5Connect the Network Cable6Configure the Controller and Install Drivers7Windows 957Automatic Configuration7Install Network Drivers from Diskette7Install the PROSet Software (Optional)8Manually Adding an OnBoard Ethernet Controller8Troubleshooting9Windows NT Server or Workstation9Automatic Configuration9Install Network Drivers - Windows NT Version 4.0 Only10Install Network Drivers - Windows NT Version 3.51 Only11Troubleshooting11DOS and Windows 3.1 Setup for Novell NetWare Clients12Automatic Configuration12Run Setup to Install Network Drivers12Troubleshooting13Responder Testing on the Network (Optional)14NetWare Server, Client 32, UNIX, OS/2, Banyan, and Other Operating Systems14Installing Multiple Adapters15Select Duplex Mode (Optional)16Manually Configuring for Full Duplex16Choose Ethernet Controller Teaming Options19General Configuration Notes19Setting Up Adapter Fault Tolerance Only19Setting up Adapter Fault Tolerance in Windows NT 4.020Deleting a Team20Setting up Adapter Fault Tolerance in NetWare21Deleting a Team22Setting Up Adaptive Load Balancing22Setting up ALB in Windows NT 4.022Deleting a Team23Setting up ALB in NetWare23Deleting a Team24Setting -Up Fast EtherChannel25Setting up FEC in Windows NT 4.025Deleting a Team26Setting up FEC in NetWare26Deleting a Team27Troubleshooting and FAQs28If the OnBoard Ethernet Controller Can’t Connect to the Network28Make Sure the Cable is Installed Properly28Check the LED Lights on the Controller28Make Sure You are Using the Correct Drivers29Make Sure the Switch Port and the Controller have the same Duplex Setting29Testing the Controller (Diagnostics)29Frequently Asked Questions (FAQs)30Technical Information32PCI Installation Tips32“Push” Installation for Windows 9533Fast Ethernet Wiring33Fast Ethernet Hubs and Switches33Shared hubs34Switching hubs34Network Software License Agreement35Size: 807 KBPages: 38Language: EnglishOpen manual