Intel X25-E SATA II User Manuals

Table of Contents

• Intel® X25-E SATA Solid State Drive

  1
• Contents

  3
  • Decoder

    2
  • Intel High Performance Solid State Drive Ordering Information

    2
• 1.0 Introduction

  5
  • 1.1 Product Overview

    5
  • 1.2 Block Diagram

    6
    • Figure 1. Block Diagram

      6
  • 1.3 Architecture

    6
• 2.0 Certifications and Compliance

  7
  • Table 1. Device Certifications

    7
• 3.0 Product Specifications

  7
  • 3.1 Capacity

    7
    • Table 2. User Addressable Sectors

      7
  • 3.2 Performance

    7
    • Table 3. Maximum Sustained Read and Write Bandwidth

      7
    • Table 4. Random Read and Write Input/Output Operations per Second (IOPS)

      8
    • Table 5. Latency Specifications

      8
  • 3.3 Electrical Characteristics

    8
    • 3.3.1 Supply Voltage

      8
      • Table 6. Operating Voltage

        8
    • 3.3.2 Power Consumption

      8
      • Table 7. Typical Power Consumption

        8
  • 3.4 Environmental Conditions

    9
    • 3.4.1 Temperature

      9
      • Table 8. Temperature Related Specifications

        9
    • 3.4.2 Altitude

      9
    • 3.4.3 Shock and Vibration

      9
      • Table 9. Shock and Vibration Specifications

        9
    • 3.4.4 Acoustics

      10
    • 3.4.5 Electromagnetic Immunity

      10
      • Table 10. Electromagnetic Immunity Specifications

        10
  • 3.5 Reliability

    10
    • Table 11. Reliability Specifications

      10
    • 3.5.1 Non-recoverable read errors

      11
    • 3.5.2 Mean Time Between Failure

      11
    • 3.5.3 Power On/Off Cycles

      11
    • 3.5.4 Write Endurance

      11
• 4.0 Mechanical Information

  12
  • Figure 2. Dimensions

    12
• 5.0 Pin and Signal Descriptions

  13
  • 5.1 Pin Locations

    13
    • Figure 3. Layout of Signal and Power Segment Pins

      13
  • 5.2 Signal Description Table

    13
    • Table 12. Serial ATA Connector Pin Signal Definitions

      13
    • Table 13. Serial ATA Power Pin Definitions

      14
  • 5.3 Hot Plug Support

    14
• 6.0 Command Sets

  15
  • 6.1 ATA Commands

    15
    • 6.1.1 ATA General Feature Command Set

      15
      • 6.1.1.1 IDENTIFY DEVICE Data

        15
        • Table 14. Returned Sector Data (Continued)

          15
    • 6.1.2 Power Management Command Set

      18
    • 6.1.3 Security Mode Feature Set

      18
    • 6.1.4 SMART Command Set

      19
    • 6.1.5 Host Protected Area Command Set

      19
    • 6.1.6 48-Bit Address Command Set

      19
    • 6.1.7 Device Configuration Overlay Command Set

      20
    • 6.1.8 General Purpose Log Command Set

      20
  • 6.2 SATA Commands

    20
    • 6.2.1 Software Settings Preservation

      20
    • 6.2.2 Native Command Queuing

      20
• 7.0 References

  21
  • Table 15. Standards References

    21
• 8.0 Glossary

  22
  • Table 16. Glossary of Terms and Acronyms

    22
• 9.0 Revision History

  23