Renesas M30620T2-RPD-E User Manuals

Table of Contents

• Preface

  3
• Contents

  4
• 1. Precautions for Safety

  7
  • 1.1 Safety Symbols and Meanings

    8
• 2. Preparation

  17
  • 2.1 Terminology

    18
  • 2.2 Package Components

    19
  • 2.3 Other Tool Products Required for Development

    19
  • 2.4 Name of Each Part

    20
    • (1) System Configuration

      20
    • (2) Inside of Emulation Pod

      21
  • 2.5 When Using the Emulator for the First Time

    22
• 3. Setting Up

  23
  • 3.1 Removing the Upper Cover

    24
  • 3.2 Setting Switches and Pullup Resistor

    25
  • 3.3 Selecting Clock Supply

    29
    • (1) Using the Oscillator Circuit on Target System

      30
    • (2) Changing the Internal Oscillator Circuit of Emulation Pod

      31
    • (3) Replacing the Oscillator Circuit Boards

      32
  • 3.4 Connecting the PC4701 and Emulation Pod

    33
    • (1) Connecting the Cable to the PC4701

      33
    • (2) Connecting the Cable to the Emulation Pod

      34
  • 3.5 Connecting the Target System

    35
• 4. Usage

  37
  • 4.1 Turning On the Power

    38
    • (1) Checking the Connection of the Emulator System

      38
    • (2) Turning On the Power

      38
    • (3) LED Display When PC4701 Starts Up Normally

      39
  • 4.2 Downloading Firmware

    40
    • (1) When It is Necessary to Download Firmware

      40
    • (2) Downloading Firmware in Maintenance Mode

      40
  • 4.3 Self-check

    41
    • (1) Self-check Procedure

      41
    • (2) If an Error is Detected in the Self-check

      41
• 5. Specifications

  43
  • 5.1 Specifications

    44
  • 5.2 Operation Timing in Memory Expansion and Microprocessor Modes (5 V)

    45
    • (1) Separate Bus, No-Wait

      45
    • (2) Separate Bus, With Wait, Accessing External Memory Area

      47
    • (3) Multiplex Bus, With Wait, Accessing External Memory Area

      49
    • (4) Timing Requirements

      51
  • 5.3 Operation Timing in Memory Expansion and Microprocessor Modes (3 V)

    53
    • (1) Separate Bus, No-Wait

      53
    • (2) Separate Bus, With Wait, Accessing External Memory Area

      55
    • (3) Multiplex Bus, With Wait, Accessing External Memory Area

      57
    • (4) Timing Requirements

      59
  • 5.4 Electrical Characteristics

    61
  • 5.5 Connection Diagram

    62
  • 5.6 External Dimensions

    64
    • (1) External Dimensions of Emulation Pod

      64
    • (2) External Dimensions of Pitch Converter Board (FLX-100LCC)

      65
• 6. Troubleshooting

  67
  • 6.1 Flowchart to Remedy the Troubles

    68
  • 6.2 When the Emulator Debugger Does Not Start Up Properly

    69
    • (1) When the LED Display of PC4701 is Abnormal

      69
    • (2) Errors Occur When the Emulator Debugger Starts Up (When the target system is connected)

      70
    • (3) Errors Occur When the Emulator Debugger Starts Up (When the target system is not connected)

      71
  • 6.3 Operation Differs from That of PROM Version MCUs

    71
    • (1) Does Not Operate with Operating Frequencies (3.6 V to 5.5 V) Properly

      71
    • (2) Does Not Operate with Operating Frequencies (2.7 V to 3.6 V) Properly

      71
    • (3) Cannot Reset from Target System

      71
    • (4) Data Values of ROM Area at Power-on Are Different

      72
    • (5) HOLD* control

      72
    • (6) A-D Conversion Values are Different from Expected Values

      72
    • (7) Outputs of ALE, Address and Others are Different from Those of Actual MCUs

      72
• 7. Maintenance and Guarantee

  73
  • 7.1 Maintenance

    74
  • 7.2 Guarantee

    74
  • 7.3 Repair Provisions

    74
  • 7.4 How to Request for Repair

    75