User ManualTable of ContentsPreface3Contents41. Precautions for Safety71.1 Safety Symbols and Meanings82. Preparation172.1 Terminology182.2 Package Components192.3 Other Tool Products Required for Development192.4 Name of Each Part20(1) System Configuration20(2) Inside of Emulation Pod212.5 When Using the Emulator for the First Time223. Setting Up233.1 Removing the Upper Cover243.2 Switch Settings253.3 Selecting Clock Supply29(1) Using the Oscillator Circuit on the Target System30(2) Changing the Internal Oscillator Circuit of Emulation Pod31(3) Replacing the Oscillator Circuit Boards323.4 Circuits of Data Slicer I/O Signal and OSD Clock I/O Signal333.5 A-D Conversion Bypass Capacitor353.6 Connecting the PC4701 and Emulation Pod36(1) Connecting the Cable to the PC470136(2) Connecting the Cable to the Emulation Pod373.7 Connecting the Target System384. Usage394.1 Turning On the Power40(1) Checking the Connection of Emulator System40(2) Turning On the Power40(3) LED Display When PC4701 Starts Up Normally414.2 Downloading Firmware42(1) When It is Necessary to Download Firmware42(2) Downloading Firmware in Maintenance Mode424.3 Self-checks43(1) Self-check Procedure43(2) If an Error is Detected in Self-checks435. Specifications455.1 Specifications465.2 Operation Timing in Memory Expansion and Microprocessor Modes (5V)47(1) Separate Bus, No-Wait47(2) Separate Bus, With Wait, Accessing External Memory Area49(3) Multiplex Bus, With Wait, Accessing External Memory Area51(4) Timing Requirements535.3 Electrical Characteristics555.4 Connection Diagram565.5 External Dimensions58(1) External Dimensions of Emulation Pod58(2) External Dimensions of Pitch Converter Board (FLX-100LCC)596. Troubleshooting616.1 Flowchart to Remedy the Troubles626.2 When the Emulator Debugger Does Not Start Up Properly63(1) When the LED Display of PC4701 is Abnormal63(2) Errors Occur When the Emulator Debugger Starts Up (When the target system is connected)64(3) Errors Occur When the Emulator Debugger Starts Up (When the target system is not connected)656.3 Operation Differs from That of Actual MCUs65(1) A-D Conversion Values are Different from Expected Values657. Maintenance and Guarantee677.1 Maintenance687.2 Guarantee687.3 Repair Provisions687.4 How to Request for Repair69Size: 704 KBPages: 72Language: EnglishOpen manual