User ManualTable of ContentsImportant safety instructions21 Installations must be performed by a qulified or licensed contractor, plumber or gas fitter qualified or licensed by the state, province or region where this appliance is being installed.22 Shut-off valve must be “T” handle gas cock.23 Flexible gas connector must not be longer than 36”.21 To contact a qualified electrician to install the appliance32 To ensure that the electrical system is adequate and in conformance with the national ANSI/NFPA 70 ELECTRICAL CODE - LATEST ED...32. DIMENSIONAL REQUIREMENTS41 24” (61 cm) min. when bottom of wood or metal cabinet is protected by not less than ¹ “ (0.64 cm) flame retard millboard cover...42 13” (33 cm) max. upper cabinet depth;43 35- º “ (90 cm) min. cabinet opening widht;44 18” (45.7 cm) upper cabinet to countertop;45 2” (5 cm) min. clearance from the sides of range to side wall or other combustible material;46 Junction box.42.1 Product dimension53. UNPACKING, MOVING AND PLACING THE RANGE64. WALL FIXING AND ANTI-TIP DEVICE74.1 Instructions for wall mounting71 Level the range using the front adjustable leveling legs.72 From the floor, measure the height of the notch found on the bracket. This notch corresponds to the centerline of the holes for the screws that will fasten the brackets to the wall.73 Attach the two anti-tip brackets to the wall using an appropriate fastener (for example, screws appropriate for the type of th...84 Correctly position the range so that the two screws fit the anti-tip brackets on the range perfectly.84.2 Mounting the rear top upstand91 Position the upstand above the top, taking care to align holes A with holes B.92 Secure the upstand to the top by tightening screws C.95. Electrical connection95.1 US installation only / 3-wire branch circuit115.2 US installation and canadian installation / 4-wire branch circuit12Size: 425 KBPages: 12Language: EnglishOpen manual