Studer Innotec C 2600-24 User Manuals

Table of Contents

• GENERAL INFORMATION

  4
• OPERATING INSTRUCTIONS

  4
• QUALITY AND WARRANTY

  4
• WARRANTY DISCLAIMER

  4
• LIABILITY DISCLAIMER

  4
• PRECAUTIONS

  4
• SPECIAL PRECAUTIONS

  5
• INTRODUCTION

  6
• 2.1 PRINCIPLE SCHEMATIC

  6
• 2.2 DESCRIPTION OF MAIN FUNCTIONS

  6
• 2.2.1 THE INVERTER

  6
• 2.2.2 THE TRANSFER SYSTEM

  6
• 2.2.3 THE BATTERY CHARGER

  6
• 2.2.4 THE SOLAR CHARGE CONTROLLER (OPTIONAL)

  7
• 2.2.5 REMOTE CONTROL

  7
• 2.3 BATTERY CONNECTIONS

  7
• 2.3.1 PARALLEL CONNECTION

  7
• 2.3.2 SERIES CONNECTION

  7
• 2.3.3 PARALLEL- SERIES CONNECTION

  8
• ASSEMBLY

  8
• 3.1 PLACE OF ASSEMBLY

  8
• 3.2.1 COMPACT

  8
• 3.2.2 PROTECTION COVER IP23

  8
• 3.3 CONNECTION

  8
• 3.3.1 GENERAL INSTRUCTIONS ON CONNECTING

  8
• 3.3.2 PROTECTION COVER FOR THE TERMINALS CONNECTIONS

  9
• 3.4 CONNECTING PLAN / FRONT SIDE

  9
• 3.5 CABLING/WIRING

  10
• 3.5.1 PRE-INSTALLATION SETTINGS

  10
• 3.5.2 CONNECTION TO BATTERY

  10
• 3.5.3 CONNECTION THE 230VAC-CONSUMER DEVICE (AC OUTPUT)

  10
• 3.5.4 CONNECTION THE 230VAC INPUT (AC INPUT)

  11
• 3.5.5 CONNECT THE SOLARMODULES: SOLAR +/- (ONLY FOR SOLAR OPTION)

  11
• 3.5.6 CONNECTION TO AUXILIARY CONTACT

  11
• 3.5.7 CONNECTION TO REMOTE CONTROL

  11
• 3.5.8 CONNECTION TO TEMPERATURE SENSOR (TEMP.)

  11
• OPERATING

  12
• 4.1 DISPLAY AND OPERATING CONTROL ELEMENTS

  12
• 4.2 LIGHT EMITTING DIODES

  12
• 4.3 PUSH BUTTONS…

  13
• 4.4 TURNING KNOBS

  13
• 4.5.1 CHARGE DETECTION SYSTEM „STANDBY“

  14
• 4.5.2 OVERLOAD

  14
• 4.5.3 OVERHEATING (OVER TEMP)

  14
• 4.5.4 BATTERY CONDITION

  14
• 4.6 THE BATTERY CHARGER

  15
• 4.6.1 CYCLE OF CHARGE

  15
• 4.6.2 EQUALIZATION CHARGING

  15
• 4.6.3 INPUT CURRENT REPARTITION (POWER SHARING)

  15
• 4.6.4 CHARGING CURRENT

  16
• 4.6.5 BATTERY CONDITION

  16
• 4.7 THE TRANSFER SYSTEM

  16
• 4.7.1 SET THE TRANSFER VOLTAGE THRESHOLD

  17
• 4.7.2 FAST (UPS)- MODE FOR THE TRANSFER SWITCH

  17
• 4.7.3 DELAYED MODE OF THE TRANSFER SYSTEM

  17
• 4.8 THE SOLAR CHARGE CONTROLLER (OPTION)

  17
• 4.9 THE MULTIFUNCTIONAL CONTACT

  18
• 4.10 THE REMOTE CONTROL

  18
• 4.11 THE TEMPERATURE SENSOR

  19
• PROGRAMMING

  19
• 5.1 STANDARD SETTING

  19
• 5.1.1 WORKING MODE

  19
• 5.1.2 BATTERY VOLTAGE

  19
• 5.1.3 AUXILIARY CONTACT

  19
• 5.2 RESET VALUE

  19
• 5.3 BATTERY VOLTAGES AND ABSORPTION TIME

  19
• 5.3.1 TABLE OF VOLTAGE AND TIMING THRESHOLD

  19
• 5.3.2 SET THE VOLTAGE AND TIMING THRESHOLD

  20
• 5.4 PROGRAMMING THE AUXILIARY CONTACT

  20
• 5.4.1 PRINCIPLE

  20
• 5.4.2 THE PROGRAMMING OF THE AUXILIARY CONTACT IS CARRIED OUT IN THE FOLLOWING STEPS

  20
• 5.4.3 EXAMPLES

  21
• 5.4.4 MANUAL OPERATING OF AUXILIARY CONTACT

  21
• 5.5 DISABLING SOME OF THE COMPACT FUNCTIONS

  21
• 5.5.1 DIAGRAM OF THE DIFFERENT MODES

  22
• MAINTENANCE

  22
• EC COMPLIANCE

  22
• TECHNICAL DATA

  23