User ManualTable of ContentsGeneral Information3OPERATING INSTRUCTIONS3QUALITY AND WARRANTY3WARRANTY DISCLAIMER3LIABILITY DISCLAIMER3PRECAUTIONS4SPECIAL PRECAUTIONS4Introduction5PRINCIPLE SCHEMATIC5DESCRIPTION OF MAIN FUNCTIONS52.2.1 The inverter52.2.2 The transfer system52.2.3 The battery charger62.2.4 The solar charge controller (optional)62.2.5 Remote control6BATTERY CONNECTIONS62.3.1 Connection in parallel62.3.2 Connection in serie62.3.3 Connection in parallel and in serie7Mounting and installing7INSTALLATION PLACE7FIXING73.2.1 XP-COMPACT7PROTECTION COVER IP237CONNECTIONS73.4.1 General instructions on connecting73.4.2 Protection cover for the terminals connections8CONNECTING PANEL / FRONT SIDE8CABLING/WIRING93.6.1 Pre-installation settings93.6.2 Connection to battery93.6.3 Connecting the 230Vac-Consumer Appliance (AC OUTPUT)93.6.4 Connecting the 230Vac Input (AC INPUT)93.6.5 Connecting the Solar modules: SOLAR +/- (Only with solar option)93.6.6 Connection to Auxiliary Contact103.6.7 Connection to Temperature Sensor (Temp.)10Control10DISPLAY AND CONTROL PARAMETERS10DISPLAY AND CONTROL PARAMETERS ON REMOTE CONTROL PANEL (OPTIONAL)11LIGHT EMITTING DIODES (LED)11PUSH BUTTONS12TURNING KNOBS12THE INVERTER124.6.1 Charge detection system „Standby“124.6.2 Overload124.6.3 Overheating (Over Temp)134.6.4 Battery Condition13THE BATTERY CHARGER134.7.1 Cycle of charge134.7.2 Equalization charging144.7.3 Default value for battery charger144.7.4 Charging current14THE TRANSFER SYSTEM144.8.1 Set the transfer voltage threshold154.8.2 FAST (UPS)- MODE for the Transfer Switch154.8.3 Delayed mode of the Transfer System15THE SOLAR CHARGE CONTROLLER (OPTION)15THE MULTIFUNCTIONAL CONTACT16THE TEMPERATURE SENSOR16The Remote Control16REMOTE CONTROL PLUG-IN16POWER MONITOR16BATTERY CONDITION:17FAULT INDICATOR175.4.1 Overtemp. (10)175.4.2 Overload (11)175.4.3 Battery low/high17DEPORTED ALARM CONTACT AND ON/OFF CONTROL17MANUAL CONTROL OF THE AUXILIARY CONTACT17Programming17STANDARD SETTING186.1.1 Battery voltage186.1.2 Auxiliary contact18RESET VALUE18BATTERY VOLTAGES AND ABSORPTION TIME:186.3.1 Table of voltage and timing threshold186.3.2 Set the voltage and timing threshold18PROGRAM THE AUXILIARY CONTACT196.4.1 Principle196.4.2 The programming of the Auxiliary Contact is carried out in the following Steps196.4.3 Example20DISABLING SOME OF THE XP-COMPACT FUNCTIONS206.5.1 Diagram of the different mode20Maintenance21CE Compliance21Technical Data22Size: 499 KBPages: 23Language: EnglishOpen manual