User Guide
Table of Contents
- 10
- 14
- 20
- 5 Carefully remove the sealing tape by pulling straight out on the tab located at the end of the ...20
- 7 Slide the Black Ink Cartridge down into the holder and push it in the direction of the arrow un...21
- 8 Unwrap and remove the Color Ink Cartridge from its packaging. Hold the cartridge by the black a...22
- 19 Run a Cartridge Alignment Test. This will ensure that your WorkCentre 470cx generates the best...24
- 33
- 4 Press 1. or press the Start/Enter button to enter the Default Resolution set up menu. You may a...48
- 48
- 6 Press the Start/Enter button to select the desired Default Resolution. The display again prompt...48
- 7 Press the Up and Down buttons or 2 on the Number keypad to enter the Default Contrast set up menu.49
- 77
- 86
- 86
- 3 Enter the telephone number of the remote machine (up to 46 digits). There are several methods a...89
- 90
- 6 The display prompts you to enter an ID for the transmission. If you want to assign a name to th...91
- 7 Press the Start/Enter button. The display shows the current time on the upper line and prompts ...91
- 8 Using the Number keypad, enter the time the fax will be sent. Use the Up or Down button to swit...91
- 10 The machine scans the document into memory, returns to Standby mode and displays a reminder th...91
- 1 When assigning a One-Touch number, press and hold the One- Touch button (01 through 20) for 2 s...94
- 2 Enter the number you want to store (up to 46 digits) using the Number keypad, then press the St...94
- 3 The display asks you to enter a name. Using the Number keypad, enter the desired name (up to 20...95
- 95
- 5 To assign another One-Touch number, press the desired One- Touch button and repeat steps 2 thro...95
- 95
- Multiple One-Touch and speed dial numbers can be registered as a Group. By using the Group number...99
- 110
- 113
- 113
- 115
- 116
- 117
- 129
- You can set up the machine to automatically receive documents from unattended remote fax machines...129
- 130
- 131
- 6 The display asks if you want to enter another fax number to receive documents from another loca...131
- a) Press the 1 button and enter another fax number using the numeric keypad, a One-Touch button, ...131
- 131
- 131
- 131
- 8 If the remote machine is secured with a poll code, you must enter the correct code, and press t...132
- 132
- 9 The display prompts for the time range, during which the machine will call and poll the remote ...132
- 132
- 11 The display prompts for the Interval Time of the continuous polling. For example, to set your ...132
- 133
- 14 The machine display returns to the standby mode. The machine display will alternate every four...133
- 133
- 134
- 134
- The WorkCentre 470cx printer driver features are described in the following sections and arranged...136
- 136
- 136
- 136
- When you see the Printer properties displayed, you can then review and change whatever settings a...137
- 138
- 140
- 140
- 140
- 141
- 142
- Use the horizontal bar or the right or left arrow to locate the appropriate document type, then s...144
- 144
- 145
- 145
- 145
- 146
- 146
- 146
- 146
- 147
- 149
- 149
- 149
- 149
- 150
- 150
- 150
- 171
- 171
- The features of the Basic Tab are described in this section. All of the features of this tab are ...181
- 181
- 181
- 181
- 181
- 181
- 181
- 181
- 181
- 181
- 183
- 184
- 184
- 185
- 186
- 186
- 190
- The features of the Image Quality tab are described below. All of the features of this tab are av...193
- 193
- 193
- 193
- 193
- 193
- 193
- 193
- 193
- 193
- 193
- 194
- 195
- 196
- 196
- The features of the Filters Tab are described below, and are used to apply various visual modific...210
- 210
- 210
- 210
- 210
- 210
- 210
- 210
- 210
- 210
- 210
- 211
- 212
- 213
- 214
- 221
- 229
- 229
- 229
- 230
- 230
- 230
- 231
- Your machine cannot connect with the remote site, or it has lost contact because of a problem on ...231
- 232
- 232
- 233
- 233
- 235
- 244
- 255
- If print quality does not improve after repeating the nozzle test, the problem may be caused by d...268
- 268
- 268
- 2 Use a clean, lint free cloth, dampened with water only, to gently clean the entire copper color...268
- 3 Allow the copper-colored area to dry, then reinstall the ink cartridge and repeat the nozzle test.269
- 281
- 282
- 282
- 282
- 282
- 282
- 282
- 283
- 283
- 283
- 284
- 307
- 307
- 319