Star Trac E-TBTi Manual De Usuario

620-7991 Rev 002

STEP 3. (E-TRx ONLY)

Note: If you have an E-TR skip this step.

Using a #2 Phillips screwdriver, remove the
screw that holds in the blank headphone jack
cap at the lower front of the Hot Bar.

Retain the

screw.

You will no longer need the cap and, if desired, you
can store it away for any possible future use.

Now take the headphone jack from the iPod®
CC hardware kit. Connect the headphone jack
to the cable in the jack opening. Use the previ-
ously retained screw to reinstall the headphone
jack. Tighten snugly.
Skip ahead to Step 5.

STEP 1.
Using a #2 Phillips screwdriver, remove the (8)
screws  from  the  upper  back  of  the  display.
Place the cover somewhere safe to keep it from
being  damaged.  Next,  remove  the  (6)  screws
from  the  lower  back  of  the  display.  Place  the
cover with the other one.

Retain all the screws

for later use.

STEP 2.
Now  remove  the  upper  cap  cover  that  has  the
STAR  TRAC  logo  on  it.  This  cap  is  held  in  by
the upper back cover.

You will no longer need this cap cover and, if de-
sired, you can store it away for any possible future
use.

NSTALLING

OUR PVS

-TR

-TRx