Clifford G4102X Manual De Usuario

19

© 2008 Directed Electronics. All rights reserved.

➤ 

Remote feature programming

The remote control has a menu for programming user features. Before you start 

make sure the keypad is unlocked. (See page 12) 

To program the remote user features: 

Press and hold the 

1. 

A U 

X

 button on the remote for 12 seconds. (ignore the 

car indicator at 3 seconds). The remote transmit LED turns on solid to 

indicate the  Main Menu.

Press and hold the 

2. 

 button for 1.5 seconds: The remote LED blinks  

two-times. You are now in the Remote Configuration menu. From this 

menu you can now configure the remote's keypad lock features, as 

described in the following steps. 

To configure the remote keypad lock features: 

Press the    button to change the Auto keypad lock feature. Every press of the 

 button will cycle the setting from On to Off.

When the remote LED blinks once the keypad automatically locks 6o 

•

seconds after the last button operation to avoid accidental command op-

erations. When the keypad is locked, if any command button is pressed 

the remote will not transmit and the LED will not blink.  

When the remote LED blinks twice, the keypad lock feature is Off. The 

•

remote will transmit every time a command button is pressed.  

 

If the keypad lock is On, press  , and then press 

1

3
4
5
6

2

A U 

X

 to unlock the keypad.