Toshiba EM1-31071 Manual De Usuario
14-2
14. OPERATING PROCEDURES
14.1 WEIGHING OPERATION
14.1 WEIGHING OPERATION
Menu: REG., M. DOWN, or REWRAP
Mode: WEIGH
Mode: WEIGH
The weigh mode is used to weigh a commodity and to issue the label. The label contains data such as a
weigh, unit price (price per weight) and total price (calculated as a result of the weighing operation).
The following is a basic operation seen at the sales floor of a store or at a back room where different kinds
and weights of commodities are repacked. Pressing the VOID key subtracts the last entry from the
memory.
weigh, unit price (price per weight) and total price (calculated as a result of the weighing operation).
The following is a basic operation seen at the sales floor of a store or at a back room where different kinds
and weights of commodities are repacked. Pressing the VOID key subtracts the last entry from the
memory.
Example) When PLU #100 and an unit price of $8.00 are set in the speed key #12.
1
100 g
1/4
1/2
0
0
PLU
PRT
*
The label is issued.
VOID
LB
kg
12
Enter the PLU #.
Press:
Press the
speed key.
speed key.
The unit of measure can be changed
for CA model only.
for CA model only.
LB
↔
kg
Available only when the initial
setting # 5-6 is set to 1.
setting # 5-6 is set to 1.
kg scale
lb scale
Place a commodity
on the platter.
(Ex. 1.000 lb.)
on the platter.
(Ex. 1.000 lb.)
MANUAL:
: AUTO
Press when canceling
the last sales.
the last sales.
WEIGHT
UNIT PRICE TOTAL PRICE
1.000
8.00
8.00
Liquid Crystal Display
T-BONE STEAK
REG
Remote Display
NET WT.
SELL BY
PACKED ON
PRICE lb
(Sample label)
NOTES:
1. Pressing a speed key to which no PLU data has been assigned will result in an error. In this case,
press the C key, then press a speed key to which PLU data has been assigned.
2. To change between AUTO and MANUAL, follow the procedure provided in section 14.9.
3. If a unit price exceeding 4 digits is obtained by multiplying by 2 or 4 (when pressing the
3. If a unit price exceeding 4 digits is obtained by multiplying by 2 or 4 (when pressing the
1/2
lb key or 1/4 lb key), the unit price will be 0.
4. 100 g key is available only when the scale is a kg scale or operated on kg base.
This key, however, has no function on the AU type.
5. When the 1/2 lb , 1/4 lb or 100 g key is pressed, the unit price will change on the display.
The 100 g key, however, has no function on the AU type.
6. When the “compulsory tare” is selected, a tare must be subtracted in a weighing operation, otherwise
an error message “TARE REQUIRED” will be displayed when the following operation has been done:
Manual mode: Pressing the PRT/* key
Auto mode: Placing a commodity on the platter.
Floating vendor mode: Pressing the Vendor key.
Auto mode: Placing a commodity on the platter.
Floating vendor mode: Pressing the Vendor key.
When a “TARE REQUIRED” is displayed, refer to Section 14.6 to follow the proper weighing
procedure.
procedure.
TEC STORE
(TEL) 0123-45-6789
(TEL) 0123-45-6789