Casio 5298 Manual De Usuario

1

MA1202-EA

Pull the 

 Crown 

 out to Click 1.

Push the 

 Crown 

 back in.

Push the 

 Crown 

 back in.

Rotate the 

 Crown 

 to change the 

time setting. 

When the second hand is at 
12 o’clock, pull the 

 Crown 

 out to 

Click 2.

Rotate the 

 Crown 

 to set the day.

Note

 Take care that you set the correct AM 

 



or PM time.
 When changing the time, move the 

 



minute hand four or fi ve minutes past 
your fi nal setting, and then back it up 
to the setting you want.

Note

 The day indicator setting uses a 31-

 



day month. Make adjustments for 
months of shorter lengths.
 Avoid changing the day indicator 

 



setting between the hours of 9 
p.m. and 1 a.m. Otherwise, the day 
indicator may not change correctly at 
midnight.

Accuracy:  ±20 seconds average per month

Stopwatch:  Measuring Capacity: 29'59" (30 minutes)

Measuring Unit: 1 second
Measurement: Elapsed time

Battery:  One silver oxide battery (Type: SR621SW)

Battery Life:  Approximately 2 years (30 minutes stopwatch operation per day)

Stopwatch functions

Crown Operations
Some water-resistant models (100 meters, 200 meters) 
have a screw-in crown. When you need to perform a crown 
operation, rotate it towards you to unscrew it. Then pull 
the crown out. Avoid applying undue force when pulling. 
The watch loses its water resistance while the crown is 
unscrewed. After performing a crown operation, fully screw 
the crown back in.

Crown

Loosen

If your watch has a rotary bezel...
You can rotate the bezel to align its 

▼ mark with the 

minute hand. Then you will be able to tell how much 
time has elapsed since aligning the 

▼ mark.

Start

Elapsed time

Current

 Your watch may differ somewhat from the one shown in the illustration.

  



 Some models may use a combination of hands and rotating disks to indicate 

  



information. The word “hand” in this section is used to mean both analog hands 
and rotating disks.

Elapsed time

A

A

A

A

B

Start

Stop

Re-start

Stop

Reset

Important!
Do not operate the stopwatch with the crown pulled out.

Note
An elapsed time operation will stop automatically at the end of 30 minutes.

The stopwatch measures elapsed time in 1-second increments up to 29 minutes, 
59 seconds.

Perform the following procedure if the stopwatch hands do not return to their 0 (zero) 
positions when you reset the stopwatch.

Pull the 

 Crown 

 out to Click 2.

Use A (clockwise) and B (counterclockwise) to move the 

 Stopwatch Second Hand 

 and 

 Stopwatch Minute Hand 

 to 12 o'clock.

 Holding down either button will move the second hand at high speed, until you 

  



release the button.
 The 

  



 Stopwatch Minute Hand 

 is syncronized with the 

 Stopwatch Second Hand 

.

After all of the hands are the way you want, push the 

 Crown 

 back in.

Important!
Timekeeping stops while the crown is pulled out. Correct the current time setting after 
performing the above operation.

Second Hand

Day Indicator

Click 2

Click 1

Hour Hand

Minute Hand

A

B

 Crown 

 Stopwatch Minute Hand 

24 Hour Hand

 Stopwatch Second Hand