Casio 5167 Manual De Usuario

1

MA1007-EA

[Modules 5125 and 5167]

When the second hand is at 12 o’clock, pull out the 

11 

crown to the second click to stop it1

Set the hands by rotating the crown1 Move the 

21 

minute hand four or five minutes past the setting 

you want, and then back them up to the setting1

Push the crown back in on a time signal to resume 

31 

timekeeping1

Avoid setting the day and day of the week between 

• 

9:00 p1m1 and 5:00 a1m1 The day and day of the 

week may not change in the following day if you do1

Pull out the crown to the first click1

11 

Set the day by rotating the crown counterclockwise1

21 

Set the day of the week by rotating the crown clockwise1

31 

Push the crown back in to its normal position1

41 

For watch with the elapsed time bezel  

• 

Rotate the elapsed time bezel to align the 

 mark with the 

minute hand1 

After certain amount of time elapsed, read the graduation on the 

elapsed time bezel which the minute hand points to1 

The elapsed time is indicated1

Module No1

Accuracy at normal 

temperature

(per month)

Battery type

Battery life

5125/5128

±20 seconds

SR626SW

Approx1 3 years

5167

±20 seconds

SR920SW

Approx1 5 years

5180/5199

±20 seconds

SR621SW

Approx1 3 years

Elapsed time bezel

Crown

(Normal position)

First click

(Day, day of week setting)

Second click

(Time setting)

Your watch may differ somewhat from the one shown in the illustration1

• 
Notes

Some water resistant models are equipped with a screw lock crown1

• 

With such models, you must unscrew the crown in the direction 

• 

noted in the illustration to loosen it before you can pull it out1 

Do not pull too forcibly on such crowns1 

Also note that such watches are not water resistant while their 

• 

crowns are loosened1 Be sure to screw the crowns back in as 

far as they will go after making any setting1

[Modules 5128, 5180, and 5199]

When the second hand is at 12 o’clock, pull out the 

11 

crown to the second click to stop it1

Set the hands by rotating the crown1 Move the 

21 

minute hand four or five minutes past the setting 

you want, and then back them up to the setting1

Push the crown back in on a time signal to resume 

31 

timekeeping1

Avoid setting the day between 9:00 p1m1 and 1:00 

• 

a1m1 The day may not change in the following day if 

you do1

Pull out the crown to the first click1

11 

Set the day by rotating the crown1

21 

Push the crown back in to its normal position1

31 

First click (Day setting)

Second click

(Time setting)

Crown

(Normal position)