Casio MA1102-EA Manual De Usuario

1

MA1102-EA

Your watch may differ somewhat from the one shown in the 

• 

illustration.

Some water resistant models are equipped 

• 

with a screw lock crown.

With such models, you must unscrew the 

• 

crown in the direction noted in the illustration 

to loosen it before you can pull it out. Do not 

pull too forcibly on such crowns.

Also note that such watches are not water 

• 

resistant while their crowns are loosened. Be 

sure to screw the crowns back in as far as 

they will go after making any setting.

Crown (Normal position)

Click 1  

(Day setting)

Click 2  

(Time and day of 

week setting)

Day

Day of the week

 Pull the crown out to Click 1.

1. 

 Rotate the crown to set the day. 

2. 

Avoid changing the day setting between 9:00 p.m. and 

1:00 a.m. (If you do, the day indication may not change at 

midnight).

 Push the crown back in to the normal position.

3. 

 Pull the crown out to Click 2 when the second hand is at 

1. 

12 o’clock. The second hand will stop.

 Set the hands by rotating the crown. As you do, the day of the 

2. 

week changes accordingly.

 After setting the day of the week, rotate the crown to set the 

3. 

time. Make sure to distinguish between AM and PM.

 On a time signal, push the crown back in to the normal 

4. 

position.

For watch with the elapsed time bezel 

 

■

Rotate the elapsed time bezel to align the 

 

mark with the minute hand. 

After certain amount of time elapsed, read the 

graduation on the elapsed time bezel which the 

minute hand points to. 

The elapsed time is indicated.

Elapsed time bezel

Module No.

Accuracy at normal 

temperature

Battery type

Battery life

5228

±20 seconds per month

SR916SW

Approx. 3 years