Toshiba DKA-UG-CRDLS-VC 4016149 Manual De Usuario

Quick Reference

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

➤

As many as four stations can be conferenced on one [DN].

3. Announce the call.

After dialing, you hear a single tone.

If the call was made with Tone Signaling 
instead of Voice First Signaling, you hear 
ringing tone.

If the called station does not answer, you receive a 
recall ring (when your station or

[DN] is idle). The 

ring is set by system programming.

4.  Hang up

The Line LED changes to steady when the called 
station connects with the transferred call.

...or press 

/LQH

, [DN] + 

 

to reconnect to the transferred 
line before the call is 
answered or busy tone is 
received.

The Line LED changes to steady red when the called 
station connects with the transferred call. After you 
hang up, the Line LED begins to flash at the on-hold 
rate or if you transferred the call from a [DN], the 
[DN] LED goes out. The CO Line or [DN] camps onto 
the called station and the called station receives a 
warning tone.

You receive a recall ring when your station or [DN]

is 

idle and camp-on is cancelled when the called station 
user fails to answer within a predetermined time. 
Repeat the procedure if necessary.

1. Press 

&QI7UQ

.

You hear internal dial tone and the LED flashes at the 
conference rate.

2. Dial a [DN]. 

The [DN] could be for a telephone or department.

3. Press 

&QI7UQ

after the party 

answers.

All parties are conferenced and the [DN] LED from 
which the conference originated lights steady.