Coleman 9160N101 Manual De Usuario

Connect Frame to Tent

–Insert one end of main tent pole

onto pin of pin & ring system at tent 
corner. (illus. 4)

–Go to opposite end of pole and 

gradually apply pressure to the pole 
forming an arch until you are able to 
insert the pin into the pole.

–Repeat for second pole. (illus. 5)

SUNDOME

™

10’x10’

1

Layout & Positioning 
of Tent, Pole Assembly

–Layout and position tent with door 

facing desired direction. (illus. 1)

–Unzip door.
–Stake down tent using the rings of the

pin & ring system at the corners of the 
tent. Keep the floor taut. (illus. 2)

–Assemble frame poles by 

interlocking shock-corded poles.

This will make two long poles.

–Insert the poles diagonally into pole 

sleeves.The center of the poles should
cross forming an “X” in the middle of
tent. (illus. 1)

–Fasten frame tie on top of tent over 

both poles. (illus. 1), (illus. 3)

2

–Select a level campsite clear of rocks, 

branches and other hard or sharp 
objects.

–Do not set up your tent under trees.
–For best results in windy conditions, do 

not position the door of tent into the wind.

–See owners manual for more tips.

Assembled
poles
inserted
through 
pole 
sleeves

Frame tie

Instructions apply to Part Number 9160N101

illus. 1

illus. 2 

Tent stake

through ring

illus.4

Insert pole end onto 
pin & ring

illus. 5 Tent

frame set-up

illus. 3 

Frame tie

Part No. 9160B102

Part No. 9160A103