Coleman 9271-141 Manual De Usuario

Layout & Positioning 
of Tent, Pole Assembly

–Layout and position tent with doors 

facing desired direction. (illus. 1)

–Stake down tent corners, using 

the tent stake loops.
Keep the floor taut.(illus. 2)

–Assemble all poles by interlocking 

shock-corded poles.

–Insert the longer Center Frame Poles into 

Center Pole Sleeves. The poles should cross 
forming an “X” in the middle of tent. (illus. 1)

–Insert the shorter Side Frame Poles through the pole 

sleeves located at the sides of tent. (illus. 1)

Connect Frame to Tent

–Unzip doors.
–Locate the Pin & Ring Systems on 

either side of the front doors and the 
corresponding Pin & Ring on the 

back side of tent.

–Insert one end of Frame Pole onto 

Pin & Ring System on tent stake 
loop on either side of the doors. (illus. 3)

–Go to opposite end of pole diagonally 

from starting point and gradually 
apply pressure to the pole forming an
arch until you are able to insert the 
Pin into pole end.

–Repeat for second pole.
–Attach tent frame clips to poles.

14’x14’ 3 Room Dome Tent

1

2

–Select a level campsite clear of rocks, 

branches and other hard or sharp objects.

–Do not set up your tent under trees.
–For best results in windy conditions, 

position the end of tent into the wind.

–See owners manual for more tips.

Door

Door

Instructions apply to Part Number 9271-141

illus. 1

illus. 2 

Tent

stake through

stake loop

illus. 4

Center section upright

Part No. 9271-402

Part No. 9271-405

Part No. 9271-403

illus. 3

Ring & Pin System 

Center poles

Side pole

Side pole

Center poles

Sidepole

Sidepole