Coleman 9278B247 Manual De Usuario

Connect Frame to Tent

–Locate the pin & ring systems on 

either side of the front door and the 
corresponding pin & rings on the back
side of tent.

–Insert one end of black frame pole 

onto pin & ring system on tent stake 
loop on either side of front door. (illus. 3)

–Go to opposite end of pole diagonally 

from starting point and gradually apply
pressure to the pole forming an arch 
until you are able to insert the pin into 
pole end.

–Repeat for second pole.
–Attach tent frame clips to poles.

Montana Big Sky

™

14’x7’ 

1

Layout & Positioning 
of Tent, Pole Assembly

–Layout and position tent with door 

facing desired direction. (illus. 1)

–Unzip door.
–Stake down tent corners, using the

tent stake loops. Keep the floor taut.
(illus. 2)

–Assemble black, longer frame poles

by interlocking black shock-corded 
poles.

–Insert the black poles into center pole 

sleeves. The poles should cross 
forming an “X” in the middle of tent.
(illus. 1)

2

–Select a level campsite clear of 

rocks, branches and other hard or
sharp objects.

–Do not set up your tent under trees.
–For best results in windy conditions, 

position the end of tent into the wind.

–See owners manual for more tips.

Front door

Instructions apply to Part Number 9278B247

illus. 1

illus. 2 Tent

stake through

stake loop

illus. 4

Center section upright

Part No. 9278A242

Part No. 9278A243

illus. 3
pin & ring system 
located on the front &
rear of tent

Black poles

Black pole

Part No. 9278B244