Cisco Systems 4300E Manual De Usuario

The Device Processes window displays the processes that occupy TCP or UDP ports, and lets you stop 
any of these processes.

Take care when stopping processes because some processes are required for the camera to operate 
properly. Processes that you stop in this window can restart the next time that you log in to the IP camera. 
If you delete a required process and the camera stops functioning, exit your web browser and then log 
back in to the IP camera to restart the process. If the process does not restart, power the IP camera off 
and then back on.

To display the Device Processes window, access the configuration windows as described in the 

, click Administration, then click 

Device Processes.

To stop any process, click the Delete button that appears to the right of the process in the window.

 describes the options in the Product Process window. All options are for display only.

Firmware Version

Version of the firmware that is installed on the IP camera.

Firmware Released 
Date

Release date of the current firmware.

Details button

Click this button to display a pop-up window with additional information 
about the firmware on the IP camera.

Firmware Upgrade

To upgrade the firmware on the IP camera, begin by entering the path and 
folder where new firmware file for the IP camera is stored. The upgrade file 
may be stored on another PC. You can click Browse to find this location. 

Upgrade button

After entering the path and folder for the firmware file, click this button to 
load the firmware upgrade on the IP camera.

Do not power down the IP camera during the upgrade procedure. 

Protocol

Port (tcp or udp) that the process occupies

Local Address

IP address of the device that the process is listening to

Foreign Address

IP address and port number of the client device that is connected for the 
process

State

State of the process

Program Name

Name of the process