Ricoh 06576 Manual De Usuario
6
89
App
e
ndi
x
x
t
Memo
• In rare cases, the camera may not operate correctly due to
static electricity. This can be remedied by taking the battery
out and putting it back in again. If the camera operates
correctly, it does not require any repairs.
out and putting it back in again. If the camera operates
correctly, it does not require any repairs.
Troubleshooting
Problem
Cause
Remedy
The camera does
not turn on.
not turn on.
Battery is not
installed properly.
installed properly.
Check the orientation of the
battery.
battery.
The battery power
is low.
is low.
Charge the battery.
The shutter cannot
be released.
be released.
The built-in flash is
being charged.
being charged.
Wait until charging is finished.
There is no
available space on
the memory card.
available space on
the memory card.
Insert a memory card with
available space or delete
unwanted images.
available space or delete
unwanted images.
Data is being
processed.
processed.
Wait until processing is
finished.
finished.
The lens aperture
ring is set to a
position other than
9
ring is set to a
position other than
9
Set the lens aperture ring to the
9
9
position or select [Enable] in
[26 Using Aperture Ring] of the
E
E
4 menu. (p.86)
Autofocus does
not work.
not work.
The subject is
difficult to focus
on.
difficult to focus
on.
v
cannot work well for low-
contrast objects (the sky, white
walls, etc.), dark colors,
intricate designs, rapidly-
moving objects or scenery shot
through a window or a net-like
pattern.
Lock focus on another object
located at the same distance as
your subject, then aim at the
target and take a picture.
Alternatively, use w.
walls, etc.), dark colors,
intricate designs, rapidly-
moving objects or scenery shot
through a window or a net-like
pattern.
Lock focus on another object
located at the same distance as
your subject, then aim at the
target and take a picture.
Alternatively, use w.
The subject is too
close.
close.
Move away from the subject
and take a picture.
and take a picture.
The focus cannot
be locked.
be locked.
AF Mode of Live
View is set to f.
View is set to f.
Set [Contrast AF] to e, j,
g
g
, h or i. (p.50)
The built-in flash
does not
discharge.
does not
discharge.
The flash mode is
set to A or B.
set to A or B.
When the flash mode is set to
A
A
or B, the flash does not
The camera is not
recognized when it
is connected to a
computer.
recognized when it
is connected to a
computer.
The USB
connection mode
is set to [PTP].
connection mode
is set to [PTP].
Set [USB Connection] to [MSC]
in the D2 menu.
in the D2 menu.
Dust or dirt
particles appear in
images.
particles appear in
images.
The CMOS sensor
is dirty or dusty.
is dirty or dusty.
Activate [Dust Removal] from
the D4 menu. The Dust
Removal function can be
activated every time the camera
is turned on and off.
Refer to “Sensor Cleaning”
(p.90) if the problem persists.
the D4 menu. The Dust
Removal function can be
activated every time the camera
is turned on and off.
Refer to “Sensor Cleaning”
(p.90) if the problem persists.
Problem
Cause
Remedy