Panasonic DMC-FX55 Manual De Usuario

Descargar
Página de 128
Advanced (Recording pictures)
34
VQT1J59
3 Press [MENU/SET].
A The [AUTO POWER LCD] icon 
([
]([
])), [POWER LCD] icon 
([
])
 or [HIGH ANGLE] icon ([
]) 
appears.
∫ Canceling setting
If you press and hold [LCD MODE] again 
for 1 second the screen shown in step 
2
 is 
displayed. Select [OFF] to cancel a setting.
• High angle mode is also canceled if you 
turn the camera off or power save mode is 
activated.
• The brightness of the pictures displayed 
on the LCD monitor screen are increased 
in Auto Power LCD, Power LCD and High 
angle modes. Therefore, some subjects 
may look different on the LCD monitor. 
However, this does not affect the recorded      
pictures.
• The LCD monitor automatically returns to 
normal brightness after 30 seconds when 
recording in Power LCD mode. Press any 
button to make the LCD monitor bright 
again.
• If the screen is difficult to see because of 
light from the sun etc. shining on it, use 
your hand or another object to block the 
light.
• Auto Power LCD and High angle mode 
are not activated in the following cases.
– When the clipboard is playbacked in 
clipboard mode [
]
– In playback mode [
]
– In print mode [
]
– While the menu screen is displayed
– While the review screen is displayed
Taking Pictures using 
the Built-in Flash
[
]:[AUTO 
POWER LCD]
The Power LCD is 
automatically activated in 
bright places such as 
outdoors etc. When the 
power LCD is activated, 
[
] changes to [
].
[
]:
[POWER LCD]
The LCD monitor 
becomes brighter and 
easier to see even when 
taking pictures outdoors.
[
]:
[HIGH ANGLE]
The LCD monitor is 
easier to see when taking 
pictures with the camera 
held high above your 
head. This is useful when 
you cannot get close to 
the subject because 
there is a person in the 
way. (However it 
becomes more difficult to 
see when looked at 
straight on.)
[OFF]
The LCD monitor returns 
to the normal brightness.
A
DMC-FX33_ENG.book  34 ページ  2007年7月9日 月曜日 午後2時16分