Panasonic BB-HCE481A Manual De Usuario

Operating Instructions

15

You need to prepare the following to access the camera in IPv6.

PC Requirements
Operating System: Windows XP Service Pack 1 or later
Web Browser: Internet Explorer 6.0 or later

An IPv6 Connection Service
To connect in IPv6, subscribe to the ISP's "IPv4/IPv6 Dual-Stack" or "IPv6 over 
IPv4 Tunneling" service. The camera does not function on IPv6-only networks.

In Windows XP, you cannot access the camera by entering its IP address in the 
web browser. Enter the IPv6 URL that was registered using the domain name 
service. We recommend the Viewnetcam.com service (see page 70) as a domain 
name service. Ask your ISP about other IPv6 domain name services.

•

IPv6 is short for "Internet Protocol Version 6".

•

IPv6 was created to provide the additional IP addresses that will be needed as 
the Internet continues to expand.

•

IPv6 is expected to gradually replace IPv4, with the 2 coexisting for a number 
of years during a transition period.

•

Though most ISPs (Internet Service Providers) do not yet support IPv6, many 
local networks already use it. When your ISP supports IPv6, your Panasonic 
Network Camera will be ready!

•

For more information, visit http://www.ipv6.org/.

Set up the router as you subscribe to the IPv6 service. If access from the WAN side 
is disabled on the router, enable the TCP packets from the WAN side using packet 
filtering. See the Panasonic Network Camera support website at http://
panasonic.co.jp/pcc/products/en/netwkcam/ for information about the 
recommended routers.