Panasonic BB-HCE481A Manual De Usuario
Operating Instructions
158
6.1.5
Updating the Camera Firmware
The Update Firmware page allows you to update the camera’s firmware. If new
firmware is available, install it into the camera.
firmware is available, install it into the camera.
Note
•
Do not turn off the power during a firmware update.
•
All buffered images on the internal memory will be deleted after the firmware
update. The buffered images on the SD memory card are not deleted.
update. The buffered images on the SD memory card are not deleted.
•
The firmware version is displayed on the Top page and the Status page.
•
If the camera's firmware is updated, all alarm logs are deleted.
1.
Download the new firmware from the Panasonic Network Camera support
website at http://panasonic.co.jp/pcc/products/en/netwkcam/, and save it
on your PC.
website at http://panasonic.co.jp/pcc/products/en/netwkcam/, and save it
on your PC.
2.
Click [Update Firmware] on the Maintenance page.
3.
Click [Update Firmware].
•
The camera restarts.
•
The Update page is displayed after about 1 minute.