Concord Camera 2040 Manual De Usuario

41

TV MODE

The camera allows you to view individual files and record clips on the television. To begin,
check your television documentation to determine what video standard you should set your
camera to either NTSC or PAL.

How to change the TV Mode setting:
1. Slide the Mode Switch to (      ).
2. Press the MENU button to view the (       ) Main Menu.
3. Press          until Setup is highlighted.
4. Press         to enter the Setup menu.
5. In the Setup menu press          until TV is highlighted
6. Press         to change the setting to NTSC or PAL.
7. Press the MENU button to exit.

Connections
1. Connect the TV-Out cable into the jack marked VIDEO or VIDEO

IN on your television.

2. Turn on your television.
3. Set the television to video mode according to the instructions in

the owner’s manual. (This is usually channel 3, 4 or AV).

4. Turn the camera on by pressing the (      ) Power button.
5. Connect the other end of the cable into the VIDEO port located in

the cable connection panel. (fig.1.1)

Using the TV as a Live Viewfinder:
1. Connect the camera to the TV.
2. Turn the camera on.
3. Slide the Mode Switch to (       ) Review mode.
4. The TV will become a live viewfinder.

Note: You may record your TV Mode session by using your VCR.  Please refer to your
VCR documentation to learn more about recording.

fig.1.1

EV

WB

Brightness

Setup

+

WB

–

Time-out

60S

TV

NTSC

PlayLogo

O f f

Language

Time-out

60S

TV

PAL

PlayLogo

O f f

Language

2040 Manual-4L (512950-00)  2003:09:06  2:07 PM  Page 41