Casio EX-Z27 Manual De Usuario

113

Other Settings (Set Up)

[SET] * MENU * Set Up Tab * USB

You can use the procedure below to select the USB communication protocol, which is 
used when exchanging data with a computer, printer, or other external device.

[SET] * MENU * Set Up Tab * Video Out

You can use the procedure in this section to select either NTSC or PAL as the video 
output system. You can also specify an aspect ratio of 4:3 or 16:9.

• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use. 

Images will not display correctly if you select the wrong aspect ratio.

• Images will not display correctly unless the camera’s video signal output setting 

matches the video signal system of the TV or other video equipment.

• Images cannot be displayed correctly on a TV or video equipment that is not NTSC 

or PAL.

• An optionally available AV cable (EMC-4A) is required for video output.

Select this setting when connecting to a computer (pages 87, 97). 
With this setting, the computer sees the camera as an external 
storage device. Use this setting for normal transfer of images from 
the camera to a computer.

Select this setting when connecting to a printer that supports 
PictBridge (page 80). This setting simplifies the transfer of image 
data to the connected device.

Video system used in Japan, the U.S., and other countries

Video system used in Europe and other areas

Normal TV screen aspect ratio

Wide screen aspect ratio