Bodyline Products International 216MFD-V Manual De Usuario

RTSP
The RTSP protocol allows a connecting client to start an MPEG-4 stream. Check the box to 

enable the server and enter the RTSP port number to use. The default setting is 554. Note 

that MPEG-4 video streams will not be available if this service is not enabled.

Network Traffic
Connection Type - The default setting is Auto-negotiate, which means that the correct 

speed is automatically selected. If necessary, you can set the connection speed by selecting 

it from the drop-down list.

Maximum bandwidth - To minimize the impact on other services running on your 

network, it is possible to configure the maximum network bandwidth the product will be 

allowed to use. Specify the maximum bandwidth (in Mbit/s or kbit/s) allowed, or set to 

Unlimited. 

Quality of Service (QoS) provides the means to guarantee a certain level of a specified 

resource to selected traffic on a network. Quality can be defined as e.g. a maintained level 

of bandwidth, low latency, no packet losses, etc. The main benefits of a QoS-aware 

network can be summarized as:

• The ability to prioritize traffic and thus allow critical flows to be served before 

flows with lesser priority.

• Greater reliability in the network, thanks to the control of the amount of band-

width an application may use, and thus control over bandwidth races between 

applications.

The QoS in Axis network video products marks the data packets for various types of 

network traffic originating from the product. This makes it possible for network routers 

and switches to e.g. reserve a fixed amount of bandwidth for these types of traffic. The 

AXIS 216FD/FD-V/MFD/MFD-V marks the following types of traffic:

• video
• audio
• event/alarm
• management network traffic.

For each type of network traffic supported by your Axis network video product, enter a 

DSCP (Differentiated Services Codepoint) value. This value is  used to mark the traffic’s IP 

header. When the marked traffic reaches a network router or switch, the DSCP value in the 

IP header tells the router or switch which type of treatment to apply to this  type of traffic, 

for example, how much bandwidth to reserve for it.