Panasonic AG-HMC152EN Manual De Usuario

77

Following information is displayed depending 
on the situation.

Performance of the auto white balance or the 
auto black balance
Warning (Page 79)
The ND filter recommended under the 
prevailing shooting conditions is displayed.
The AWB error message (LOW LIGHT / 
LEVEL OVER) is displayed. (Page 39）
The functions allocated to the USER buttons 
are displayed while you hold down the DISP/ 
MODE CHK button.

Displayed during the expanded display.

Appears when in the setup menus, 
RECORDING SETUP screen, MIC ALC, you 
have selected “ON”.

When markers are displayed, the brightness 
level around the center of the screen is 
indicated as 0% to 99%. “99%↑” appears if the 
percentage is over 99.

Month:
JAN (January), FEB (February), MAR (March), 
APR (April), MAY (May), JUN (June), 
JUL (July), AUG (August), SEP (September), 
OCT (October), NOV (November), 
DEC (December)

Displays recording frame rate.
Not displayed when set to 1080/50i.

The shutter speed is displayed here.

•

•
•

•

•

15  Audio level meter display (Page 49)
16  Auto iris control display

STD:  Standard auto-iris control
SPOT:  Auto iris control for spotlight
BACK:  Auto iris control for backlight 

compensation

Displays F value.

The zoom poison is displayed with Z00 
(maximum wide-angle) - Z99 (maximum zoom).
The unit can be switched to mm in the ZOOM 
& FOCUS item of the setting menu DISPLAY 
SETUP screen.

Displays the focus control information with 99 - 00.
In the auto focus mode, AF appears. In the manual 
focus mode, MF appears. When the display is set to 
macro control, the black and white of AF or MF are 
displayed in reverse.
95 (Focal distance: infinity)
:
00 (Focal distance: approx. 5 cm)
Depending on the zoom position, the macro 
range may not be enabled. 
Also, depending on the zoom position, the 
lower limit value of macro range may be 
different. The units can be switched between 
feet and m in the ZOOM & FOCUS item of the 
setting menu DISPLAY SETUP screen.

(INDEX/ SHOT MARK)
Displayed when a USER button to which the 
INDEX function or SHOT MARK function has 
previously been allocated is pressed during 
recording.
INVALID will be displayed if an index or shot 
mark cannot be attached.

ND filter selected is displayed.

Displays the gain value of the image amplifier 
configured. (During the auto mode, AGC is 
displayed.)

Displays the information of white balance.
ATW:       

When ATW is set

P3.2K/P5.6K: 

In the case of preset

Ach/Bch:     

In the case of A/B

LOCK:     

When 

ATW 

is 

locked