Siemens 6AU1900-1AB32-0BA0 Manual De Usuario
Configuring
3.5 Customize the display of the cam
CamTool
Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0
Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0
3-21
For the J diagram (jerk diagram), change the representation parameters in the
window J Diagram Properties.
Figure 3-15 J Diagram Properties window
Table 3-3
Parameters for the V, A or J Diagram Properties windows
Field/button
Explanation/instructions
Representation range
Automatically
If you activate Automatically, the representation range in the
Y-direction will be automatically changed to the value range
of the displayed curve.
If you deactivate Automatically, you can use maximum
If you deactivate Automatically, you can use maximum
value and minimum value to specify the representation
range in the Y-direction.
Maximum value
(automatically deactivated)
(automatically deactivated)
Specify here the maximum value of the representation
range.
If the Automatically option has been activated, the system
If the Automatically option has been activated, the system
will determine the maximum value.
Minimum value
(automatically deactivated)
(automatically deactivated)
Specify here the minimum value of the representation
range.
If the Automatically option has been activated, the system
If the Automatically option has been activated, the system
will determine the minimum value.
Grid lines
Set automatically
If you activate Set automatically, the grid lines will be
displayed automatically with an optimum spacing.
If you deactivate Set automatically, you can use Main line
If you deactivate Set automatically, you can use Main line
spacing or Auxiliary line spacing to specify the grid line
spacing.
Main line spacing
You can activate the display of the grid lines for the main
line spacing here.
If you deactivate the Set automatically option, you can
If you deactivate the Set automatically option, you can
specify the grid line spacing for the main line spacing.
Note:
The spacing that you specify for the grid lines in the main
Note:
The spacing that you specify for the grid lines in the main
line spacing must be a multiple of the spacing that you
specify for the grid lines in the auxiliary line spacing.