Lucent Technologies 555-670-111 Manual De Usuario
MERLIN LEGEND Communications System Release 7.0
System Programming
System Programming
555-670-111
Issue 1
April 1999
Programming with SPM
2-2
System Requirements
2
those tasks most commonly performed by the system manager (for
example, add or delete members of groups, perform system
inventories, create reports, administer multiple systems, make
station labels shown on display telephones, and more). Pictorial
representations of system components, such as modules and their
vintages, and the creation of MLX telephone button labels are
available with WinSPM. WinSPM also provides an SPM DOS
Emulator mode that allows basic SPM programming of all releases of
the MERLIN LEGEND System. Also supported in Release 6.0 and
later systems is SPM programming for options not included in the
GUI. For Release 6.0 and later systems, WinSPM is supported in
Windows 95
example, add or delete members of groups, perform system
inventories, create reports, administer multiple systems, make
station labels shown on display telephones, and more). Pictorial
representations of system components, such as modules and their
vintages, and the creation of MLX telephone button labels are
available with WinSPM. WinSPM also provides an SPM DOS
Emulator mode that allows basic SPM programming of all releases of
the MERLIN LEGEND System. Also supported in Release 6.0 and
later systems is SPM programming for options not included in the
GUI. For Release 6.0 and later systems, WinSPM is supported in
Windows 95
,
Windows NT, and Windows 98, and is available on CD-
ROM and floppy disks.
DOS SPM and WinSPM software can be used directly from the
floppy disks or CD-ROM on your PC. If your PC has a hard disk,
however, you should install DOS SPM or WinSPM from either the
floppy disks or CD-ROM onto the hard disk.
floppy disks or CD-ROM on your PC. If your PC has a hard disk,
however, you should install DOS SPM or WinSPM from either the
floppy disks or CD-ROM onto the hard disk.
This guide describes the use of SPM on a PC with a DOS operating system or use
of WinSPM in the SPM DOS Emulator mode. If you are using WinSPM, refer to
the documentation and online help provided with the WinSPM application for
additional information. If your system includes the Intuity or IS II/III applications,
you have the UNIX System version of SPM.
of WinSPM in the SPM DOS Emulator mode. If you are using WinSPM, refer to
the documentation and online help provided with the WinSPM application for
additional information. If your system includes the Intuity or IS II/III applications,
you have the UNIX System version of SPM.
For information about accessing SPM from the IS II/III application, refer to the
following books:
following books:
■
Integrated Solution III System Manager’s Guide, order no. 555-601-010
■
Integrated Solution III Installation and Maintenance Guide, order
no. 555-601-011
no. 555-601-011
■
Integrated Solution II System Manager’s Guide, order no. 555-600-726
■
Integrated Solution II Installation and Maintenance Guide, order
no. 555-600-720
no. 555-600-720
System Requirements
2
To use SPM for system programming, you need the SPM diskette and an
approved PC with version 3.3 (or later) of MS-DOS. At a minimum, your PC
should support and include the following items:
approved PC with version 3.3 (or later) of MS-DOS. At a minimum, your PC
should support and include the following items:
■
At least 640 kbytes of RAM
■
A floppy disk drive to accommodate the SPM disk (3.5-inch or 5.25-inch)
■
A monochrome or color monitor