Hearth & Home Technologies Tucson (8700) Manual De Usuario

HearthStone Quality Home Heating Products Inc

                                                                   Tucson 

Model #8700

 

 

18

 

1. 

The Tucson Direct-Vent is approved for 
installation only with the vent 
connecting components listed on  this 
page. Use the following instructions 
along with the pipe manufacturer’s 
instructions to complete the installation. 

 

2. 

Attach the inner starter collar and gasket 
to the unit with the eight # 8-32 x 3/8" 
Phillips Head self-tapping screws.  

 
NOTE: If required to use the restriction 
plate, please refer to Figure 9 for correct 
locations of the additional gasket, restriction 
plate, and inner adapter configuration. 
 
Make sure the  screw head on the restriction 
plate faces into the firebox. This will allow 
for future adjustments if needed. 
 

3. 

Place the outer starter collar and gasket 
onto the back of the stove. Secure the 
outer adapter with the eight  # 8-32 x 
3/8" Phillips Head self-tapping screws 
that are provided. Install the rest of the 
vent system according to the 
manufacturer’s instructions. 

 
 
 

1.  Restriction Plate     5950-922 
2.  Gasket 4”  

   3160-155 

3.  Inner starter 

   924H1 

4.  Gasket 6”  

   3160-157 

5.  Outer Starter 

   924H1