Hearth & Home Technologies GBST4336I Manual De Usuario

Descargar
Página de 49
Heatilator  •  GBST4336I, GBFL4136I  •  2135-900 Rev. B  •  3/08
8
C. Clear Space
WARNING! DO NOT place combustible objects in front 
of the fi replace or block louvers. High temperatures may 
start a fi re. See Figure 2.2.
 Avoid placing candles and other heat-sensitive objects on 
mantel or hearth. Heat may damage these objects.
Figure 2.2  Clear Space
G. Outside Air (optional)
The outside air kit supplies some fresh combustion air for 
your fi replace. It may help reduce the effects of negative 
air pressure. (See Section 6.B.)
•  Refer to Figure 2.1 for location of control.
•  Close the inlet to prevent cold drafts when the fi replace 
is not being used.
CAUTION! Risk of Burns! The outside air control handle 
is HOT when fi replace is in operation. Adjust BEFORE 
lighting fi re.
E. Fixed Glass Assembly
See Section 14.G.
D.  Decorative Doors and Fronts
WARNING! Risk of Fire! Install ONLY doors or fronts 
approved by Hearth & Home Technologies. Unapproved 
doors or fronts may cause fi replace to overheat.
This fireplace has been supplied with an integral 
barrier to prevent direct contact with the fi xed glass 
panel. DO NOT operate the fi replace with the barrier 
removed. 
Contact your dealer or Hearth & Home Technologies if 
the barrier is not present or help is needed to properly 
install one.
For more information refer to the instructions supplied with 
your decorative door or front.
F.  Remote Controls, Wall Controls and Wall 
Switches
Follow the instructions supplied with the control installed 
to operate your fi replace: 
For safety:
•  Install a switch lock or a wall/remote control with child 
protection lockout feature.
•  Keep remote controls out of reach of children.
See your dealer if you have questions.
CLE
AR S
PA
CE
 3 FT
. IN FRONT OF FIREPLACE
H.  Before Lighting Fireplace
Before operating this fi replace for the fi rst  time,  have a 
qualifi ed service technician
:
•  Verify all shipping materials have been removed from 
inside and/or underneath the fi rebox.
•  Review proper placement of logs, ember material and/or 
other decorative materials.
•  Check the wiring.
•  Check the air shutter adjustment.
•  Ensure that there are no gas leaks.
•  Ensure that the glass is sealed and in the proper position 
and that the integral barrier is in place.
WARNING! Risk of Fire/Asphyxiation! DO NOT oper-
ate fi replace with fi xed glass assembly removed.
Î